Back to the track tonight... some 15psi tuning runs with the new cams. We'll see if I can beat the best 15psi run for the car so far... 12.114 @ 112.34
Back to the track tonight... some 15psi tuning runs with the new cams. We'll see if I can beat the best 15psi run for the car so far... 12.114 @ 112.34
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Good luck!!!
Carroll
SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.
Good luck!
Any conclusion on the shift fork pads?
Quiet for a friday night... could got a lotta runs in...
OK, some 15psi runs with the new cams straight up... spun hard in 1st and short shifted 2nd each run.
I was reeling in this Nova...
Me ................. Nova
R/T: .210 ................. .130
60': 1.819 ................. 1.684
330': 5.207 ................. 4.772
1/8ET: 7.941 ................. 7.438
1/8mph: 91.33 ................. 91.99
1000'ET: 10.255 .................9.759
1/4ET: 12.235 ................. 11.719
1/4mph: 116.21 ................. 115.22
R/T: 1.207
60': 1.807
330': 5.211
1/8ET: 7.940
1/8mph: 91.49
1000'ET: 10.255
1/4ET: 12.223
1/4mph: 117.63 (best mph on 15psi for this setup)
^^^^ looks like a bracket car with way too much mph
Played with the cams a little bit...
R/T: .260
60': 1.866 < worse 60' than last run by .059
330': 5.187 < better 330' by .024 so combined about .083 better by this point
1/8ET: 8.558 < DOH! Missed 3rd, hard to stock spinning thu 2nd
1/8mph: 66.50
1000'ET: 12.148
1/4ET: 15.723
1/4mph: 60.38
Noticed some smoke from turbo, looks like there is a leak from the oil return line... called it a night.
Shift fork pads seem ok so far.. some trans issue still, dont think its the forks, gotta granny shift 3rd or it wont hit
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Dude... You know you need an 11.8 for the Quick 8 Bump Spot Turn up the boost already How much air is in those slicks?
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
LOL.. tuning cams at 15psi then upping the boost... oh, and somewhere finding traction?
Slicks were at 10psi...
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
less air in the slicks, a switch to lower the boost in 1st or 2nd gear and more boost in 3-5 and youll be golden.
oh yeah and find that shifting issue.
where did you put the brass pads? every shift fork or just some of them?
Brian
Originally Posted by turbovanman
Yeah, I'll definitely try lower... they look pretty flat on this heavy car! The slicks are also pretty old too.
This is on 15psi, cant make the boost go lower...
Brass on both the 1-2 and 3-4, plastic on 5th
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Every trip to the track is a learning experience, aint' it?. Glad you got her out man! Nice work!
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
Thanks it was good to get out! I really really want to turn up the boost but need some traction first...
Yes it is... apparently the turbo is not draining too well with 80-100psi oil pressure at startup? Gonna work on drainagle a bit today.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
restrictor before turbo?
I really dont like that idea... cuz oil pressure goes down once warm.
I'm going to do some porting in the custom return line fittings first.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
or don't boost it cold
LOL, yeah that too.... but it idles at 90psi cold.
I'm not used to the 2.4L oiling system yet, with the new cams at idle, warm, it throttles between 20psi and 40psi
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
mine is 60-70 cold (70* ambient) and 30 warmed with 15w-40
In all fairness I haven't been able to beat on it enough to find problems like that due to clutch issues.
Sounds similar...
So far I found that the oil return to the pan is submerged a little when the front of the car is on stands (like it was when I put the new cams in and ran it for a while) and that also means that oil might be standing up against the back of the pan going down the track? I race ported the oil return fittings and will see if that helps, with the car level of course.
Odd thing is it is leaking out between the CHRA and turbine housing, not the exhaust like its should?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
JT,
Are you by any chance using the SRT-4 oil pump on your car?
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=