|
|
» September 2010 |
| S |
M |
T |
W |
T |
F |
S |
| 29 | 30 | 31 |
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
| 1 | 2 |
|
|
Turbo Mopar Knowledge Center!
|
|
Internal engine part weights.
This article was written by turbovanman on 06-10-2010.
My TII rods that I removed the parting line and had them balanced-692
grams
Stock TII rods, untouched-710 grams
Eagle EDZ SRT rods-573 grams
TU billet K1 rods-600 grams-I was told this, never weighed them.
Stock std Mahle 2.5 8 valve piston-366 grams
Sealed Power .020 2.5 cast piston-362 grams
Wiseco .040 forged 2.5 slug-368 grams
My 2.5 JE's with rings and a small hole-404 grams
TIII std Mahle piston-418 grams
JE .020 8 valve-2009 production-335 grams
Venolia .020 hybrid piston-371 grams
Stock Dodge pin-125 grams
Wiseco wrist pin-122 grams
JE tapered wrist pin-100 grams
Venolia wrist pin-124 grams
JE wrist pin-2009 production-112 grams
Std 2.2/2.5 rod bearings-43 grams
|
|
All articles posted on Turbo-Mopar are the exclusive property of Turbo-Mopar or it's users. They are not to be used without written permission from the author or this website.
|
|
All times are GMT -4. The time now is 09:19 AM.
