S60 turbo, FMIC, Konis, 3in exhaust, wideband, so much more!

[TurboOmni08]

NEW EDIT- I removed all the sold stuff and tried to get it easier to read. Also, the Daytona interior (Enthusiast) will be destroyed if someone does not step forward for it. I am now giving it away...a few beers would be great but whatever, I just want to see it be used for something.

Please PM me with offers as well. I'm interested in moving this stuff.
Located in 22664, VA. All this stuff has never been run on the road by me, most of it is new, if its used it is in the condition I bought it in. To much stuff to worry with pics, serious people can request pics if needed. This is the parting of a 3 year Daytona project. I am getting out of TDs to focus on my home, starting a family, and maybe buying an older Mopar later on.

Performance
Wideband - PLX M300 used - $200

Head - 89' TII, Machine shop installed FM SS back-cut valves and chrome moly springs and retainers. Cam is stock 89 T1, head ports are stock. $225 (pictures show head bare before it was bolted to the block. Comes as listed, been bolted to a block once, never used)


Turbo (New Super 60) - $600 SOLD

Large can WG - $50 SOLD

2.5in SV - $75 SOLD

Lines and silicone drain (TU) - $80 SOLD

Wires/cap/distributor/HEP (Magnacore/new aftermarket) - $50 SOLD

Valve Cover (Painted "Go Mango" orange) - $25 SOLD


Ported exhaust $20 (weld on EGT bung it makes it a chance)

Ported TII intake w/52mm tb $100

Fuel rail with AFPR $100

Rebuilt A555 w/ moly endplate $550


Shifter for A555 from 89 Daytona and cables (I think its the OEM short) $100

NEW TU Kevlar clutch - $275

NEW TU Aluminum Flywheel - $275 (Clutch and flywheel $500)

OEM TIII clutch/pressure plate used - $25

Mopar performance passenger and front mounts $40 each (used)

A/C delete bracket w/ polybushings $100

FWD-P Stage 5 for 2.5L/super 60 - $100


Universal strut tower bar, polished - $50 PENDING

89 Lebaron GTC rear axle w/ disc brakes - $100

3X24X12 polished aluminum FMIC, 3in inlets, brackets to mount on a daytona behind nose cone - $100


Daytona Specific
TII radiator w/ leak fixed - $100

Recovered headliner w/ overhead console grey - $75

89 ES interior, grey cloth, nearly perfect. $75

Daytona/Lebaron digital dash w/ plugs - $90

12 Button traveler $65 (I have a second one with no top cover - $50, Both have new buttons installed)

Spoiler (I have 2)- $25

Recondishioned and primed nose cone - $75

GFX kit - $100

Random -
GLH bodykit w/ mounts - Small crack on bottom of front lip - $200

Rest of the rolling 89 Daytona Shelby hardtop... Still has Shelby brakes and pumpers. Make me an offer and come get it in 22664, VA.

[tryingbe]

Great prices in there, PM sent.

[TurboOmni08]

I just tossed up a few pics I have. This is all nice stuff. I spent all the money I made during college on this stuff. I have outgrown what I wanted this car to be and there are just to many other things going on now to fool with it.

[STEVE B]

Can you send me some better pictures of the intercooler? What are the measurements on it? Thanks Steve
fun2.2turbo@att.net

[nomadman2001]

Interested in the Koni's & shocks. I will send you a PM with my e-mail addy.

Thanks, Jim.

[Captain Chaos]

On the wheel, it says with keys? Is that the adapter to mount it?

[TurboOmni08]

On the wheel, it says with keys? Is that the adapter to mount it?

Keys for the switch in the column. The wheel is already mounted to the column...

[TurboOmni08]

Can you send me some better pictures of the intercooler? What are the measurements on it? Thanks Steve
fun2.2turbo@att.net

I gave the measurements up top. Its a 3in core, 24 wide by 12 high. Thats the best picture I have, its not off the car yet. Just drill 4 holes and cut holes to run the pipes though.

[Captain Chaos]

Oh, you're selling the whole thing, sorry.

[TurboOmni08]

I can take the wheel off. Doesn't matter to me. Offer?

[BIG PSI]

What condition is the T2 radiator in ????

Do you have any pics ?

Chuck

[menace2society]

Whats the difference between the discontinued 2801 springs versus the newer 2804's? I read that the 2804s will aprox lower the car 1" but, it might make the nose of a G-body look higher.

[menace2society]

I did a search on the 2804s - 2801s. shoulda done that in the first place before asking.

PM sent on the eibach springs

[TurboOmni08]

What condition is the T2 radiator in ????

Do you have any pics ?

Chuck

Chuck,
The radiator had a pinhole leak in it and I took it to a repair shop. They fixed the hole, on the edge of the tank where one of the tubes attaches. The old man pressure tested it and said it was good to go. I put it back in the car without the intercooler (but using the intercooler brackets) and haven't touched it. The car has been sitting for like 2 years now. I forgot it has an electric fan (brand new) attached to it, so I'm going to need to get like $125 for it if you would like the fan. I will try to get some pics early in the week. Shoot me a PM if you are interested in it. I am trying to keep track of who contacts me about things and keep the order and names right. Lots of PMs!!!

I have a bunch more stuff to ad that I forgot I had. I will be doing that as soon as I get this darn camera working.

[thefitisgay]

nice valve cover bump

[TurboOmni08]

MORE STUFF! I will keep adding as I find/remember new things. I have so much TD stuff but this is the end for awhile so it all goes! Remember I am open to offers. No trades unless someone has a 57-58 Plymouth or Chrysler that they want to get rid of.

Older ATC system. Complete. Can be retrofited into most any vehicle...I was going to use this on my van but never got around to trying it. $50


NOS Mopar grill for Omni/Horizon $50


87? Daytona A555 shifter SOLD

88/89 Full power seat control with harness $35


88/89 Power seat delete panel (cool thing if you have SRT or race seats) $25


Universal strut tower bar modified for G-body. $50


Spoiler for Lebaron convertible, Lebaron Sedan, Spirit. No light. $100


Daytona tail lamps. Outsides $45 Centers $20


Grey rear trim pieces $5/each


MSD Blaster II brand new $40 PENDING


Random high-pressure AN hose $15/lot


Lumina hood vents. Same kind used on "The Blue Baron" $45


Autometer rings designed to angle gauges. $15 PENDING


Random items...make offer

[TurboOmni08]

Bump. Make me some offers boys!

[1966 dart wagon]

Do you have the plastic pieces that run along the carpet to hold it down where the door covers it when shut. Not sure on a name, in gray though?

Autometer rings designed to angle gauges. $15, how much for shipping to 57106

[tthcare]

Interested in the exhaust and coil. I'll send you a PM

Tony

[1983Rampage]

Too bad you are in VA, I would take the Enthusiast interior off of you. I am needing a few parts for my car.