Turbo Mopar Forums
Site Home Register Search Mark Forums Read New Posts My Threads Knowledge Center Board Info


Support Our Vendors
Go Back   Turbo Mopar Forums > Technical > Electrical & Fuel System > H2O / N2O/ Alky Injection
Reply
 
Thread Tools Display Modes
  #1  
Old 01-31-2006, 03:28 AM
86shelby15psi 86shelby15psi is offline
Banned
 
Join Date: Dec 2005
Posts: 82
water injection

do u think it will me a good investment on my 86 s/c t2
Reply With Quote
  #2  
Old 02-10-2006, 12:39 PM
87turbodance 87turbodance is offline
Garrett booster
 
Join Date: Jan 2006
Location: London, Ontario
Posts: 152
Re: water injection

It works very well to get that extra bit of boost without having to pull to much timing. I have my car set up to use a two stage system this summer. A small jet for when boost just starts (1 - 8 psi) then the big jet kicks in after that. I have a third jet installed in cse I need more water. If you're not running a intercooler (using log) then it works very well. I disconnected the knock sensor on my old log setup (noisy top end was giving false triggers) and then ran water pump and mcmaster carr nozzle and a pressure switch like a fifth injector setup. Doing this made the car so much faster. I believe the Lm was pulling a ton of timing before.
Reply With Quote
  #3  
Old 02-19-2006, 12:44 AM
cordes's Avatar
cordes cordes is offline
Supporting Member
Turbo Mopar Contributor
 
Join Date: Dec 2005
Location: Tuscola, IL
Posts: 8,230
Re: water injection

Quote:
Originally Posted by 87turbodance
It works very well to get that extra bit of boost without having to pull to much timing. I have my car set up to use a two stage system this summer. A small jet for when boost just starts (1 - 8 psi) then the big jet kicks in after that. I have a third jet installed in cse I need more water. If you're not running a intercooler (using log) then it works very well. I disconnected the knock sensor on my old log setup (noisy top end was giving false triggers) and then ran water pump and mcmaster carr nozzle and a pressure switch like a fifth injector setup. Doing this made the car so much faster. I believe the Lm was pulling a ton of timing before.

Do you have any pics of your setup?
Reply With Quote
  #4  
Old 02-20-2006, 09:53 AM
dodgeshadowchik's Avatar
dodgeshadowchik dodgeshadowchik is offline
boostaholic
 
Join Date: Dec 2005
Location: MI
Posts: 1,053
Re: water injection

i was just going to post a topic on this. i was reading MM&FF magazine at work yesterday because i read all the other magazines already, and i came across an article on methonal/water injection on boosted applications. it seemed like a reletivily easy setup and inexpensive, as well. they produced some really good results. i guess i don't see any reason it wouldn't work well on a turbo dodge. oh, i don't know how true this is, but the magazine claimed their mustang saw a 67 HP increase using the setup.
Reply With Quote
  #5  
Old 02-20-2006, 10:15 AM
Rattlesnake Rattlesnake is offline
Hybrid booster
 
Join Date: Dec 2005
Location: Mooresville, NC
Posts: 338
Re: water injection

Quote:
Originally Posted by 86shelby15psi
do u think it will me a good investment on my 86 s/c t2
That really works. I gained 24hp and 55lbs/ft(dyno tested) advancing timming and raising boost with no knock.
Reply With Quote
  #6  
Old 02-20-2006, 10:25 AM
GLHS592 GLHS592 is offline
turbo addict
 
Join Date: Dec 2005
Location: Nunnelly, TN
Posts: 2,001
Send a message via AIM to GLHS592
Re: water injection

Check this out:
http://members.cox.net/stevemonroe/AlcoholInjMod.html

I may try it down the road.
__________________
Kevin Isenberg
EVERYTHING is for sale!
Reply With Quote
  #7  
Old 02-20-2006, 05:41 PM
cordes's Avatar
cordes cordes is offline
Supporting Member
Turbo Mopar Contributor
 
Join Date: Dec 2005
Location: Tuscola, IL
Posts: 8,230
Re: water injection

Quote:
Originally Posted by GLHS592
Check this out:
http://members.cox.net/stevemonroe/AlcoholInjMod.html

I may try it down the road.
Thanks for the link.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Picked up a OLD spearco water injection kit! ShadowFromHell H2O / N2O/ Alky Injection 8 07-26-2009 02:49 PM
water vapor injection Xtrempickup H2O / N2O/ Alky Injection 4 03-14-2008 06:02 PM
#4 coolant mod question supercrackerbox Engine - Block, Piston, Heads, Intakes 30 01-19-2007 12:07 PM
The #4 Coolant Mod... ---------- Converted Frank Old FAQ Info 1 11-05-2006 04:52 AM


All times are GMT -4. The time now is 07:02 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.

This site is 100% supported by its members. Turbo-Mopar.com is in no way affiliated with Chrysler/Dodge or Mopar. The Dodge & Mopar logos and likeness are registered trademarks of Chrysler, LLC. The contents of this site are owned by Turbo-Mopar.Com and may not be used or reproduced without the express written permission of the Administrator.
Ad Management by RedTyger