Page 85 of 170 FirstFirst ... 357581828384858687888995135 ... LastLast
Results 1,681 to 1,700 of 3392

Thread: BadAss SRT-Z - 2.4L / A568 - Update!!!

  1. #1681
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    Update... head is on, just set up the timing and bolted on the ATI damper... still got the alternator, manifolds, turbo, downpipe, IC piping, etc, etc to put on, re-plumb oiling, fabricate new crank trigger setup... ok, back to the garage!
    I really hate how all of those little things add up.

  2. #1682
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by Austrian Dodge View Post
    thats exactly what i'm interested in
    is that damper a press fit on the crank?
    Yes, its made for the 2.4L so bolts/presses on like a stocker or any of the aftermarket pulleys. I have pics of the installation tool I made too, works awesome! Need to make into KC article...

    Here is my old MSD trigger custom mounted to the old UD pulley:
    Click image for larger version. 

Name:	old-trigger.jpg 
Views:	107 
Size:	88.7 KB 
ID:	31226

    Here is the ATI installed. Note the 3 bolt holes where the trigger ring will mount
    Click image for larger version. 

Name:	ATI-installed.jpg 
Views:	115 
Size:	96.8 KB 
ID:	31227

    You can kinda see in the pic I still need to move the pick-up about an inch towards you as the ATI has two belt grooves and the old UD pulley's outer belt groove was removed.

    Quote Originally Posted by cordes View Post
    I really hate how all of those little things add up.
    Yes they do! Got pretty far today... still lots to do...

    Click image for larger version. 

Name:	2011_05_30.jpg 
Views:	100 
Size:	132.0 KB 
ID:	31228

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  3. #1683
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: BadAss SRT-Z Update!!!

    That is looking good. I like how the ATI looks compared to the MSD wheel.
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

  4. #1684
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Thanks. The ATI damper will be covered with the MSD wheel this week LOL

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  5. #1685
    Supporting Member Turbo Mopar Contributor turbo2point2's Avatar
    Join Date
    Jan 2006
    Location
    Philly
    Posts
    946

    Re: BadAss SRT-Z Update!!!

    Looking good JT. If you haven't already keyed the damper to the crank, it would be good to do it now. You don't need another headache down the road.

    -Brian Slowe
    87 Shadow "BSX"
    8.58 @ 162

    86 GLHT
    10.62 @ 130

    05 SRT4
    12.1 @ ???.??

    06 Ram 3500

  6. #1686
    boostaholic
    Join Date
    Feb 2007
    Location
    Illinois
    Posts
    1,184

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by glhs0426 View Post
    Yes, even as far as the same longblock. The differences were the accessories and intake manifold. The non-turbo used the same bare block except for the turbo drain not being machined. Same idea as the 2.2 Turbo vs. non-Turbo.
    No oil squirters for the pistons on the NA block either. Doesn't seem to make a bit of difference though. I wish I had the oil return port on the block, but having a return drilled into the oil pan works too.

  7. #1687
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by turbo2point2 View Post
    Looking good JT. If you haven't already keyed the damper to the crank, it would be good to do it now. You don't need another headache down the road.
    Thanks. ...and I didn't yet, was hoping the press would be enough? I'm guessing you keyed yours? Pics?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  8. #1688
    Supporting Member Turbo Mopar Contributor turbo2point2's Avatar
    Join Date
    Jan 2006
    Location
    Philly
    Posts
    946

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    Thanks. ...and I didn't yet, was hoping the press would be enough? I'm guessing you keyed yours? Pics?
    I keyed mine right after I first got it running. It rotated 20* on the dyno and of course threw the timing off. I'll see if I can get a pic of it. I drilled it undersize then used a 1/4" reamer and slid a .001" over dowel pin in. I did it on the car so even with you having the motor in, you should be able to do it fairly easily.

    -Brian Slowe
    87 Shadow "BSX"
    8.58 @ 162

    86 GLHT
    10.62 @ 130

    05 SRT4
    12.1 @ ???.??

    06 Ram 3500

  9. #1689
    Supporting Member Turbo Mopar Contributor turbo2point2's Avatar
    Join Date
    Jan 2006
    Location
    Philly
    Posts
    946

    Re: BadAss SRT-Z Update!!!

    Here ya go...

    Click image for larger version. 

Name:	0531111020.jpg 
Views:	108 
Size:	429.5 KB 
ID:	31249Click image for larger version. 

Name:	0531111017a.jpg 
Views:	106 
Size:	370.2 KB 
ID:	31250

    -Brian Slowe
    87 Shadow "BSX"
    8.58 @ 162

    86 GLHT
    10.62 @ 130

    05 SRT4
    12.1 @ ???.??

    06 Ram 3500

  10. #1690
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Awesome, thanks Brian! Did you use any fixture to line up the drilling or just your mad skillz?

    BTW... I realized after I asked that the BSX has a 2.2L bottom end? Which car is this in?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  11. #1691
    Supporting Member Turbo Mopar Contributor turbo2point2's Avatar
    Join Date
    Jan 2006
    Location
    Philly
    Posts
    946

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    Awesome, thanks Brian! Did you use any fixture to line up the drilling or just your mad skillz?

    BTW... I realized after I asked that the BSX has a 2.2L bottom end? Which car is this in?
    No fixture, just measured where I wanted the dowel to be and center punched it. Just took my time and made sure I was nice and straight. The damper was on the BSX until I broke the snout off of the crank.

    -Brian Slowe
    87 Shadow "BSX"
    8.58 @ 162

    86 GLHT
    10.62 @ 130

    05 SRT4
    12.1 @ ???.??

    06 Ram 3500

  12. #1692
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    So mad skillz it is

    ooooh, I gotcha... so that pic of the timing sprocket includes the end of the crank that broke off? ouch.

    Whats on there now?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  13. #1693
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    No project is complete without having to fab something up... The ATI has two belt grooves where the old UD pulley had one (I had cut the outer one off on a lathe) so I needed to increase the reach of the sensor bracket... noticed it used to vibrate a tad so I added a rib for good measure
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	msd-bracket-old.jpg 
Views:	108 
Size:	113.8 KB 
ID:	31331   Click image for larger version. 

Name:	msd-bracket-new.jpg 
Views:	104 
Size:	93.2 KB 
ID:	31332  

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #1694
    Hybrid booster Turbo Mopar Contributor Austrian Dodge's Avatar
    Join Date
    Dec 2005
    Location
    Vienna, Austria (Europe)
    Posts
    860

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    Yes, its made for the 2.4L so bolts/presses on like a stocker or any of the aftermarket pulleys. I have pics of the installation tool I made too, works awesome! Need to make into KC article...

    Here is my old MSD trigger custom mounted to the old UD pulley:
    Click image for larger version. 

Name:	old-trigger.jpg 
Views:	107 
Size:	88.7 KB 
ID:	31226

    Here is the ATI installed. Note the 3 bolt holes where the trigger ring will mount
    Click image for larger version. 

Name:	ATI-installed.jpg 
Views:	115 
Size:	96.8 KB 
ID:	31227
    i've heard that it tends to rotate, resulting in wrong ignition timing when having a trigger wheel on the crank.

    keyed mine also, but had the crank out and did it on a mill.
    http://www.turbo-mopar.com/forums/ph...ith_pulley.jpg

    i've also opened up the inside of the UD pulley a tad, so that it slides on easier and not having to use a puller every time.
    might also be possible on the ATI damper....maybe brian slowe knows

  15. #1695
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    866

    Re: BadAss SRT-Z Update!!!

    Sweet pics JT Hopefully I can check it out in person soon

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  16. #1696
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by Austrian Dodge View Post
    i've heard that it tends to rotate, resulting in wrong ignition timing when having a trigger wheel on the crank.

    keyed mine also, but had the crank out and did it on a mill.
    http://www.turbo-mopar.com/forums/ph...ith_pulley.jpg

    i've also opened up the inside of the UD pulley a tad, so that it slides on easier and not having to use a puller every time.
    might also be possible on the ATI damper....maybe brian slowe knows
    Thanks for the info/pic! Got some 1/4 dowels... waiting to pin it until after I get it running to make damn sure the trigger wheel is where I want it LOL!

    Quote Originally Posted by Rampage16V View Post
    Sweet pics JT Hopefully I can check it out in person soon
    Thanks, hope we can meet up too... and Ditto, I want to see the RWD monster!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  17. #1697
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2006
    Location
    Edmonton AB
    Posts
    2,082

    Re: BadAss SRT-Z Update!!!

    Can't you make base ignition offset adjustments in your software? I just checked mine with a timing light and adjusted the MS to match.....though being a stock crank sensor it was pretty much dead on.

  18. #1698
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by turboshad View Post
    Can't you make base ignition offset adjustments in your software? I just checked mine with a timing light and adjusted the MS to match.....though being a stock crank sensor it was pretty much dead on.
    Yes I can, but it still has to be within a certain range... minimum of 10° before your highest advance, etc... blah blah blah...

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  19. #1699
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Would have had ti running last night if I had oil pressure... The pump would just not prime... great *sigh* I knew the billet rotor felt a little loose OK, time to take it all back apart and put the powdered metal grenade back in, yay!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  20. #1700
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    Would have had ti running last night if I had oil pressure... The pump would just not prime... great *sigh* I knew the billet rotor felt a little loose OK, time to take it all back apart and put the powdered metal grenade back in, yay!
    Is there any OE oil pump for a 2.4 with better construction? I know certain year non-turbo PT's used steel instead of powdered metal, but they are on intergallactic backorder.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

Similar Threads

  1. BadAss SRT-Z Update!!!
    By BadAssPerformance in forum Project Log
    Replies: 1871
    Last Post: 09-18-2011, 08:39 PM
  2. 2.4L / A568 combo with SRT-4 Clutch - KC article feeder info
    By BadAssPerformance in forum Transmission
    Replies: 3
    Last Post: 04-25-2011, 01:17 PM
  3. A555 and A568 Quaife - the latest update/news
    By Austrian Dodge in forum Turbos Unleashed
    Replies: 5
    Last Post: 09-22-2009, 01:35 PM
  4. BadAss 2.4L Neon or BadAss 2.4L Z ???
    By BadAssPerformance in forum Custom Turbo Mopars
    Replies: 47
    Last Post: 02-04-2009, 10:16 PM
  5. SDAC 16/SRT Nationals Payment update
    By speeddemon in forum SDAC Events
    Replies: 9
    Last Post: 01-30-2006, 12:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •