More RT vid.

[bansheenut420]

Went out to midnights again last friday. Not totally happy with the results, but hey, what can ya do. lol I drove it there, ran some mid 12's and drove it home. Guess thats a good night. lol Had a boost leak that was huge. :willy_nilly:
Here is a little video from the track this last weekend. Any detalis I missed just ask.

The Junkyards fat, slightly less homily, inbred co - Car Videos on StreetFire

The Junkyards fat, slightly less homily, inbred co - Car Videos on StreetFire

[bansheenut420]

screen shot of the datalog on the run. See how in 1st gear it acutally looses boost? lol It was combo of a nice boost leak, and the line going to the top of my external wastegate had a hole. So it wasnt holding the wg closed right either. lol

[bakes]

Nice runs Cory you get there soon dont worry ,too bad we couldn't play the data logs back that would be cool

[bansheenut420]

Thanks alot. If you want to go to zeitronix.com and download the software (its free) I will send you the log, but thats pretty much all of it minus my burnout. The rest is just idle. lol

[440dart]

hey good job on the vids kinda gives me an idea what mine should run like

[bansheenut420]

Thanks you very much. You car will be an animal once you get it all worked out!

[440dart]

i hope so dang clutch went out sending my cal back to cindy same time i will buy a new clutch and intercooler

[bansheenut420]

Let me know how your cal works. I have a re-cal waiting, but like the current cal I am on so I dont know if I want to change. What cooler you going with? and clutch?

[johnl]

NIce work. Since I have a TIII now (91 Spirit R/T), I have to start payin more attention to this sub-forum. I've got Zeitronix in the GLHT; there's a project to wire up all the cars so it's portable from car to car.

[Ondonti]

I have talked to banshee about that too. WOuldnt be hard to move the box around and then when you get the money to buy another box, pop it in.

[rx2mazda]

Nice! Those times look familiar, lol. I should be getting back to the track later this month when the heat and humidity drop.

[turbovanman]

Nice job,

I love the datalogging. I guess you have a boost sensor? rpm signal etc?

[bansheenut420]

Originally Posted by rx2mazda

Nice! Those times look familiar, lol. I should be getting back to the track later this month when the heat and humidity drop.

I still had 2mph on ya. And, was only on 18psi. Found a huge boost leak and a hole in my line going to the top of the external so it was blowing open. I have never seen boost drop like it did in 1st with this turbo. That just goes to show how big of a leak it was. lol

Get that car to the track! Its 101 here, but, its a dry heat!

[bansheenut420]

Originally Posted by turbovanman

Nice job,

I love the datalogging. I guess you have a boost sensor? rpm signal etc?

I love my zeit. Its one of the best things I have bought for this car. I have all the sensors for it. I am going to move where my rpm signal is coming from so its cleaner. Then hook up the tps input and figure out what I am going to use the user input for. I think I am going to get fuel pressure sender and use the user input to monitor alky pressure or fuel pressure.

[bansheenut420]

Thing I am most happy about was the second gear burnouts. lol They were soooo much fun, crowd and announcer loved them. lol
6+ 2nd gear burnouts and the clutch is happy as hell still.

[440dart]

iam thinking of fwd's 4puck dual diphram or there 2500lbs plate its only $75, not sure on an intercooler dont have alot of money so iam sure it will be an ebay special. i talked to wallace lastnite he said stock clutchs dont hold much over 300whp kinda excited to hear iam makeing more than that. lol kinda sad for a 16v but i will get there

[bansheenut420]

Get Cindys 4 puck and dd plate. It will hold. and, 300whp is not sad for a 16v. Most people dont mod them much, so its a great start.