How much power for stock T3 turbo

[Simsy]

Was wondering how much power I can realistically expect from a stock T3 turbo. Going to be doing fwdp stage 4 cal, +40s, 3bar and 2.5 inch exhaust with possibly an electric cutout. My R/T already has FMIC and titanium retainers

[tryingbe]

The compressor wheel is a T3 55 trim and the turbine wheel is a T3 stage 1.

Since it's impossible to find a compressor map for a T3 55 trim wheel, here are the T3 50 trim and a T3 60 trim. Right in the middle is your ball park figure of how much air (lb/min) the turbo can support under varying pressure (2.0 = 14.7psi). Once you figure out what pressure you're looking to run, then you can use 1lb/min = 10 hp to convert to see what the max air flow the turbo can support.

Attachment 65324
Attachment 65325

Now, can your engine use that potential air flow from the turbo to make the HP, that's a different theory.


I used my dyno HP numbers with mega squirt logs to make this plot a while back to see how well the V trim turbo work on my setup.