Gasket Set for a complete rebuild.

[85_600]

Is there a gasket set that anyone recommends for a rebuild of an 85 2.2 T1? I'm looking around for the best prices and there are some out there but I want to make sure I can get the one that alot of people use for their rebuilds.

Also, since I don't quite know what caused this compression problem ( possibly fuel related ) I'm going to replace the injectors, fpr, filter and pump. For the pump I'd like to use the Walbro one listed on the APE site. Is this pump a "drop in" for the stock one or is there some other modifications that are needed?

Thanks..

[GLHSKEN]

Bottom line.. Use a walbro 255 pump.

TU sells gasket sets for rebuilds at competitive prices. He can get you any set you want even if it is not listed on his site.

[GLHSKEN]

The walbro is pretty much a drop in... contact me after you get it and I'll fill you in. EASY job. the only thing that doesn't fit 100% is the stock LOCK retainer for the pump... not needed...

[turbovanman²]

Use new head bolts and have the block drilled to 11mm, and then use a MP head gasket.

[TopDollar69]

I like to get a Fel Pro gasket set, and then purchase a mopar headgasket to go with it. Its the only way Ive found to get all the gaskets you need for a complete rebuild. One thing I would not suggest doing is buying the mopar gasket set from FWD performance, as it is just a repackaged felpro set except it doesnt come with all the gaskets you need and it has a crappy fel pro headgasket. Im still a little peeved about that one.

[5sp. mini]

pm me i have a fed mul guy in cleveland that i get parts from i can get a fel pro set at cost / and you need a cherry picker too?AL

[turbovanman²]

Doesn't matter guys, he is selling the car.

[cordes]

Doesn't matter guys, he is selling the car.

I was hoping that would not happen. He seemed like a good guy that would be a reall asset to the community.