Now selling Aurora spark plug wires.

[turbovanman²]

I decided to start selling these as I feel these are the best wires on the market today. I have been using these wires on my customer vehicles for 6 years and of course, my own cars and trucks. There a true 8.5mm spiro core, will not cause radio or computer interference, have enough resistance to let all the energy thru but also to let the coil do its job. The ends are air crimped and come with a lifetime warranty excluding abuse, fire etc.

Here are some links-good read on the benefits and construction of the wires.

http://www.auroraelectronics.com/Und...ug%20Wires.pdf


http://www.auroraelectronics.com/Spa...nstruction.pdf


The manufacterer is 30 mins from me so I can get them fairly fast. They can be custom made so longer, shorter, different ends, Hybrid wires etc, you get the idea. Choices are red and for $5 more, black.

Prices are $55 for 8V and TIII-You can have TIII's with straight or 45 deg plug boots-if you run the valley cover, run the 45 deg boots, 3.0L's are $65. If you need any other model, PM me for prices. Shipping extra.

OK, 2.0L and 2.4L wires now available. Prices are $80 for the set and let me know what length plug boots and what coil wire angles you want-straight or 90 deg.

I can do custom sets for SRT 4's, $80

Hybrid sets, $80 for red, $85 for black. PM with length and ends needed.

I can als supply TIII with a distributor wires. I came up with my own lengths but if you want something different, let me know. Its a regular wire with a 90 deg boot at the dist end and a 45 deg or straight boot at the plug. Engine not included, lol! Price is $60.

[Whorse]

Not sure how well known they are outside of BC, but I thought I'd point out to everyone on here that almost every BC TM person I know is using a set of these.

[boost geek]

There's only 2 running cars in B.C.

[Turbo_Rampage]

I'm also running Aurura wires on my Rampage, and they are awesome! I can't count how many times i unplugged the wires for checking my spark plugs, and they still snap back on the plug tight unlike most aftermarket wires like bosch that come apart after a few times..

I will be getting a set of wires off of you sometime in the next month or two for my Shadow.

[TurboGLH]

Just wondering why the 2.0/2.4's are so much more expensive? I'd like to try a set out, but for almost $90 they better be gold plated.

[turbovanman²]

Just wondering why the 2.0/2.4's are so much more expensive? I'd like to try a set out, but for almost $90 they better be gold plated.

The cost of those long boots, thats the money on those bad boys, Thats why the regular wires are so cheap, no special boots.

Jason, thats why I am selling them, to get there name out there and make some spare cash to finance the van, bike and my baby boy,

Also, like I said, there the best wire out there so why not, the rest of the world might as well enjoy them. I am sure the 2 winners will have alot to say about them.

[Mario]

What makes these the best?

[turbovanman²]

What makes these the best?

The core is a true 8.5mm spiro core, not lied about like other sets, like Taylor's 10.5mm set thats got a 6mm core. There tough, use stainless fittings that are air crimped and the boots are molded to the wires so they don't pull off. I have only lost a couple ends to being too aggressive. Try that with Taylor, Neihoff etc and everytime you change the plugs, the terminal stays with it. If you happen to do that, send me the wire and I'll send you a new one or get it fixed. I can also do custom so if you need longer, shorter, different ends, thats easily doable.

[Mario]

Sounds pretty good. I'll buy a set after the lottery is over.

[Mopar_Nutz]

I also love these wires. I've been running them for several years now and can tell you when I had a break-up under boost with Taylor wires, I swapped on the Aurora's and the problem went away. Same problem with another car running Accel wires, Aurora swap cured it again. Can't beat them, especially for the money.
Only problem I've seen with them is an occasional terminal pull-off, but with the lifetime warranty there is NO problem getting a replacement.

I couldn't be happier with them

[Garret]

after the lottery I'll buy a set as well

[turbovanman²]

Great, thanks for the kudo's guys. When your ready, PM me with your addy and what colour.

[Mario]

Hey can you hook me up on a set for a 68' Harley FLH?

[looneytuner]

Sounds pretty good. I'll buy a set after the lottery is over.

Re: Now selling Aurura spark plug wires.
after the lottery I'll buy a set as well
__________________
Garret Werstiuk

Well scratch those two from the possible winners.

[John B]

Do you take PayPal? I'd like an 8V late model set in black.

[turbovanman²]

Yes, I take paypal. I am off work until next week, keeping the wife company while she heals so I will catch up on all requests/orders then. Thanks guys, Happy New Year,

[TurbododgePirate]

Somebody said lifetime warranty... whats that all aboot?

I could use a set for my neon and 2.4. Can they be had in Black?

Is customs going to stick me in my pooper?

[turbovanman²]

Somebody said lifetime warranty... whats that all aboot?

I could use a set for my neon and 2.4. Can they be had in Black?

Is customs going to stick me in my pooper?

Yes, if the wire fails or you pull the terminal off, I will send you a new one but if you've burnt it, torn it etc, your on your own.

Customs wont' bother you and yes, black is $5 more.

[crazy1eye]

I'll take a set, 8V, coil in the stock location, red is fine.

Just in case, I'm using a Crane Hi-6 with their LX92 coil.

No rush, regular shipping is fine to H9C2S9

I have Paypal

Thanks

[turbovanman²]

Ok, send me a pm, that way I can keep track, thanks.

If everyone is this thread is interested, PM me also except John B, working on his.