Wipers don't work!

[Dave]

Well it started snowing today and I had no wipers... I looked at EVERY fuse, they're all good. I replaced the motor with a known good one, still nothing. My last guess is it's the switch. That means swapping out columns, doesn't it?

Any other ideas where to look?

[mcsvt]

How is the ground on the motor? Have you tried jumping power straight to the motor?

[JDAWG]

yea, jump power, also rin an extra ground to the motor case http://boostedmopar.com/forums/showthread.php?t=444

[JDAWG]

or, disconnect the linkage and run a shoestring through each window, tied to the wipers, and swish them back and forth while you drive

[CletusJones]

or, disconnect the linkage and run a shoestring through each window, tied to the wipers, and swish them back and forth while you drive

lol, how charmingly ghetto.

You don't have to swap columns if the switch is bad, it's only about a 20 minute job to replace it if you have a lockplate tool.

[DeckSetter]

+1 on the ground, I had the same problem and my ground was bad.

[Dave]

Thanks guys, I'll check the ground tomorrow.