Results 1 to 19 of 19

Thread: i was reading

  1. #1
    Banned
    Join Date
    Oct 2006
    Location
    whitehall ohio
    Posts
    47

    i was reading

    what is ffv and what king of car do they come off of?

  2. #2

    Re: i was reading

    had you really been reading you would have found this information....that FFV is a Flex Fuel Vehicle. there are many kinds of cars they come off of. basically any anything labled as a Flex Fuel Vehicle, here is a list http://www.e85fuel.com/e85101/flexfuelvehicles.php . for example my 2000 Grand Caravan is FFV as is my 1997 Taurus. there are many many vehicles that have FFV. so what does FFV mean. it means you can run some other fuel besides just Gasoline. Most common is E85 which comprises of 85% Ethanol and 15% gasoline. if you try running E85 in a non FFV vehicle, you may run into problems with the fuel injectors, fuel line, fuel pump and other driveability concerns. Ethanol is very corrosive. FFV vehicles have special components to avoid failure. for more information contact E85 web page @ http://www.e85fuel.com

  3. #3
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,462

    Re: i was reading

    You can spot the chryco FFVs in the yard because they look like a latter model TI without the turbo, and they have a stainless fuel rail.

  4. #4
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: i was reading

    2slowforu

    You're not Roy, are you?

  5. #5
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: i was reading

    I am about 75% sure it is him.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  6. #6
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Enfield, CT
    Posts
    685

    Re: i was reading

    Quote Originally Posted by 22mopar View Post
    had you really been reading you would have found this information....
    Frank and Ken created this board to have a place with minimal drama. Where people could ask questions without being told to use the search function (if you have time to tell people to search, you have time to just post the answer) and were newbies could ask questions without being ridiculed.

    This kind of statement just drives people away, and not everyone has been around these car's for years and they may ask questions sometimes that seem silly to us but is an honest request for information.

    Please try and keep things in the spirit of the board, help out if you can but please do it nicely.

  7. #7
    Banned
    Join Date
    Oct 2006
    Location
    whitehall ohio
    Posts
    47

    Re: i was reading

    ok thanks guy's i'll look at the junk yard 1 day this week

    sorry wrong person frank


  8. #8
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: i was reading

    Quote Originally Posted by 2slowforu View Post
    ok thanks guy's i'll look at the junk yard 1 day this week

    sorry wrong person frank

    Because you think you got away with it? The internet information tells me otherwise. It tells me you are indeed Roy. You live in Columbus, OH and keep creating accounts. I banned your last username when you refused to send me a scanned copy of your driver's liscense. I am going to require it again. Send me it to my e-mail address listed under my profile. You can mark out the driver liscence number.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  9. #9
    Banned
    Join Date
    Oct 2006
    Location
    whitehall ohio
    Posts
    47

    Re: i was reading

    ok just to prove im not who you think i am give me intell friday so i can go get my id because i lost it and i will show you im not the person you think i am deal?

  10. #10
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: i was reading

    Thanks.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  11. #11
    Hybrid booster mo' parts's Avatar
    Join Date
    Dec 2005
    Location
    Worthington, OH
    Posts
    906

    Re: i was reading

    Quote Originally Posted by Frank View Post
    I am about 75% sure it is him.
    i talked to 2slowforu last night...regarding an engine i had for sale.
    he's not in whitehall, and he owns a shelby charger, and a black glht. sounds like the roy i met a while back in columbus while stopping at a friends house.... hmmmmmm. same person who kept driving by my friends house revving his engine long after i had left?
    i thought that user name sounded familiar, it was in a list of several that mike shepard had posted as roys usernames. this one needs added to the bad deals thread.

  12. #12
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: i was reading

    Well for the benifit of the doubt Whitehall is technically inside Columbus, OH city limits per say. However the internet tells me that it is indeed him. The cars are appearing to be the same. He used the previous username of fastglh86. I knew it was him, however just kept watching. He told people his name was john at one point, roy at another point, and gave copout excuses. I asked him for proof, he ignored me, so I banned him perminantly. This is almost the identical situation, same cars, etc.

    Here are all the names I have been in the past....

    psi2hi, 4.5daytona, 86shelby15psi, sprayu2, fastglh86 - Turbo Dodge Forums
    psi2hi, pegging20psi, 86shelby15psi, sprayu2, fastglh86 - Turbo Mopar Forums

    Here is all the e-mails he has used...
    burmese434@yahoo.com, burmese600@yahoo.com, burmese434@netscape.net, turbododge@netscape.com, turbododge15psi@yahoo.com, fastglh86@aol.com

    I havent included this guys because if it is a legit person, I wont give out the information.

    Anyway...


    Frank
    Last edited by Frank; 11-29-2006 at 02:19 PM.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  13. #13
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: i was reading

    Quote Originally Posted by mo' parts View Post
    i talked to 2slowforu last night...regarding an engine i had for sale.

    Does he looks 16?

  14. #14
    Hybrid booster mo' parts's Avatar
    Join Date
    Dec 2005
    Location
    Worthington, OH
    Posts
    906

    Re: i was reading

    Quote Originally Posted by tryingbe View Post
    Does he looks 16?
    does that need an answer?

    it's roy, just got off the phone with him.

  15. #15
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: i was reading

    So Roy, how were you going to prove this one? Dont worry I wont ban you until I hear the answer... or Friday comes. I actually knew it was you for over a week, just watching for confirmation... see I know all!
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  16. #16
    Hybrid booster
    Join Date
    Dec 2005
    Location
    martinsburg w.v
    Posts
    299

    Re: i was reading

    i hope your car blows up BOY . thanks for the junk turbo and mani

    billy

  17. #17
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: i was reading

    Oh I have also killed your access to the Exchange section... so when are you going to answer this thread?
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  18. #18
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: i was reading

    Well, I don't think that is the last of him.

  19. #19

    Re: i was reading

    Quote Originally Posted by TurboGLH View Post
    Frank and Ken created this board to have a place with minimal drama. Where people could ask questions without being told to use the search function (if you have time to tell people to search, you have time to just post the answer) and were newbies could ask questions without being ridiculed.

    This kind of statement just drives people away, and not everyone has been around these car's for years and they may ask questions sometimes that seem silly to us but is an honest request for information.

    Please try and keep things in the spirit of the board, help out if you can but please do it nicely.
    Hey, I'm stating the facts as I see it. then if you read the following posts, looks like Frank is really giving it to the originator.

Similar Threads

  1. Wideband reading at Idle
    By SpoolinGLH in forum Maintenance & General Tech
    Replies: 10
    Last Post: 05-08-2008, 06:04 PM
  2. Reading a/f gauge
    By Devsdaytona in forum "I need help!"
    Replies: 5
    Last Post: 09-30-2006, 10:41 PM
  3. EGT reading..
    By Turbo_Rampage in forum Exhaust
    Replies: 2
    Last Post: 05-08-2006, 01:02 AM
  4. Air/fuel ratio reading..
    By Turbo_Rampage in forum "I need help!"
    Replies: 23
    Last Post: 05-03-2006, 07:39 PM
  5. Am I reading this wrong? 87 LM question.
    By 85_600 in forum Electrical & Fuel System
    Replies: 5
    Last Post: 04-14-2006, 09:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •