Results 1 to 9 of 9

Thread: Phenolic Spacer for 2-Piece Intakes

  1. #1
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    2,017

    Phenolic Spacer for 2-Piece Intakes

    Phenloic Spacer for 2-piece Intake $80
    3/8" Phenloic Micarta spacer
    contoured to match intake with slightly smaller ports to accomdate casting variances .
    Will need to take saftey precautions when grinding Micarta (dust masks in well ventilated area) due to fibers
    $40 deposit required
    can deliver to SDAC/Carlisle

    Click image for larger version. 

Name:	20240517_205413.jpg 
Views:	264 
Size:	1.45 MB 
ID:	66646
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,646

    Re: Phenolic Spacer for 2-Piece Intakes

    I'll take one!

  3. #3
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    2,017

    Re: Phenolic Spacer for 2-Piece Intakes

    Quote Originally Posted by cordes View Post
    I'll take one!
    thanks
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  4. #4
    Mitsu booster
    Join Date
    Jun 2015
    Location
    Southern Tier, NY
    Posts
    40

    Re: Phenolic Spacer for 2-Piece Intakes

    I'm interested in a couple of them. I'm assuming the chief reason is for insulating heat, and increased runner volume? I've got one of Adam's upper intake plenums...assuming it'll work perfectly with that?

  5. #5
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    2,017

    Re: Phenolic Spacer for 2-Piece Intakes

    Quote Originally Posted by MGeyer View Post
    I'm interested in a couple of them. I'm assuming the chief reason is for insulating heat, and increased runner volume? I've got one of Adam's upper intake plenums...assuming it'll work perfectly with that?
    yes, it's to isolate the intake plenum and keep that big mass from heat soaking
    should work great with Lengel's Plenum
    which body style are you putting it in ? I'm not sure how much taller his plenum is but as long as there is another 3/8" plus clearance space above it .. you should be good.
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  6. #6
    Mitsu booster
    Join Date
    Jun 2015
    Location
    Southern Tier, NY
    Posts
    40

    Re: Phenolic Spacer for 2-Piece Intakes

    Quote Originally Posted by "Top Fuel" Bender View Post
    yes, it's to isolate the intake plenum and keep that big mass from heat soaking
    should work great with Lengel's Plenum
    which body style are you putting it in ? I'm not sure how much taller his plenum is but as long as there is another 3/8" plus clearance space above it .. you should be good.
    The one with Adam's plenum is going on my 87 Shelby Z, the other I plan to use on my 85 GLH with an 87 Turbo II in it. It's got its stock flat hood on it now, but plan to put the Turbo hood that I also bought from Adam on it.

  7. #7
    Mitsu booster
    Join Date
    Jun 2015
    Location
    Southern Tier, NY
    Posts
    40

    Re: Phenolic Spacer for 2-Piece Intakes

    Quote Originally Posted by "Top Fuel" Bender View Post
    Phenolic Spacer for 2-piece Intake $80

    Will need to take safety precautions when grinding Micarta (dust masks in well-ventilated area) due to fibers


    Hi Bruce, do you have a recommendation on the grinding bit to use on these spacers?
    Thanks,
    Mike

  8. #8
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,190

    Re: Phenolic Spacer for 2-Piece Intakes

    Double cut pattern carbide burr should work fine.

    Something like this
    https://www.haascnc.com/haas-tooling...s/03-2063.html

    Not this
    https://www.haascnc.com/haas-tooling...s/03-2064.html
    1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
    1987 Shelby CSX #418. Long term rebuild and restore ?

  9. #9
    Mitsu booster
    Join Date
    Jun 2015
    Location
    Southern Tier, NY
    Posts
    40

    Re: Phenolic Spacer for 2-Piece Intakes

    Quote Originally Posted by 135sohc View Post
    Double cut pattern carbide burr should work fine.

    Something like this
    https://www.haascnc.com/haas-tooling...s/03-2063.html

    Not this
    https://www.haascnc.com/haas-tooling...s/03-2064.html
    Good deal. Thanks for the info.

Similar Threads

  1. Engine 1/2" thick phenolic spacer
    By thedon809 in forum Parts For Sale
    Replies: 0
    Last Post: 06-07-2018, 06:36 PM
  2. Engine 1 piece TII intakes
    By Shadow in forum Parts For Sale
    Replies: 1
    Last Post: 02-16-2011, 01:41 PM
  3. General 2 Piece Intake Upper Plenums and Phenolic Spacers
    By GLHNSLHT2 in forum Parts For Sale
    Replies: 37
    Last Post: 02-06-2009, 07:40 PM
  4. Would a phenolic spacer be of any benefit?
    By turbovanmanČ in forum 16v Factory Engines
    Replies: 17
    Last Post: 01-28-2009, 07:36 PM
  5. Anyone want a Phenolic spacer for a TIII?
    By turbovanmanČ in forum General Vendor Area
    Replies: 11
    Last Post: 01-26-2009, 08:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •