Results 1 to 7 of 7

Thread: 36-1 Crank Trigger Rings $35

  1. #1
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,988

    36-1 Crank Trigger Rings $35

    Group Buy :

    Pre-sale for 36-1 Crank Trigger Wheel (ring only)
    Can deliver to SDAC/Carlisle
    requires $18 deposit

    is for the ring/wheel only
    you will need to have it welded to your pulley
    highly suggest having it turned after welding to true up the wheel
    runout will be determined on how true your pulley runs

    Please specify
    '84-87 Non-Common Block
    Click image for larger version. 

Name:	20240516_213309.jpg 
Views:	16 
Size:	1.39 MB 
ID:	66641

    '88 Only
    Click image for larger version. 

Name:	20240516_213337.jpg 
Views:	15 
Size:	1.33 MB 
ID:	66642

    '89-up Common Block
    Click image for larger version. 

Name:	20240516_213357.jpg 
Views:	21 
Size:	1.24 MB 
ID:	66643

    Click image for larger version. 

Name:	20240314_144638.jpg 
Views:	21 
Size:	1.26 MB 
ID:	66644Click image for larger version. 

Name:	20240314_134017.jpg 
Views:	19 
Size:	805.0 KB 
ID:	66645

    Have not tried on the TIII serpentine setup yet
    Last edited by "Top Fuel" Bender; 05-19-2024 at 12:07 AM.
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,537

    Re: 36-1 Crank Trigger Rings $35

    Are the pulleys the same regardless of if it's an AC pulley or not?

  3. #3
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,988

    Re: 36-1 Crank Trigger Rings $35

    these mount to the A/C part of the pulley but won't interfere with running an a/c belt if mounted flush on the belt side
    good thought on the early cars or those that modify the pulley
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  4. #4
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,988

    Re: 36-1 Crank Trigger Rings $35

    Quote Originally Posted by cordes View Post
    Are the pulleys the same regardless of if it's an AC pulley or not?
    NOW AVAILABLE for NON-A/C Pulley
    36-1 trigger wheel ring will need to be welded to the water pump/alt section of the pulley. If you already ordered the standard trigger wheel and would like the non-a/c version lmk and I can swap them out for you.
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  5. #5
    Mitsu booster
    Join Date
    Nov 2022
    Location
    Chattanooga
    Posts
    1

    Re: 36-1 Crank Trigger Rings $35

    I sent you a long rambly, potentially drunken pm the other day lol but havenít heard back so was wondering how can I go about ordering one of these bad boys? For an 89 with a/c.

  6. #6
    Mitsu booster
    Join Date
    Jun 2015
    Location
    Southern Tier, NY
    Posts
    31

    Re: 36-1 Crank Trigger Rings $35

    If these are still available, I'd like to have one. I've got an 86 Turbo Z with a 2.5 CB T2 setup with 88 SMEC in it with Ostrich & MPScan(??). I'm struggling with trying to figure it out, so was thinking of pulling the whole bit off and starting fresh with a Micro/Mega squirt system.
    Thanks,
    Mike

  7. #7
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,537

    Re: 36-1 Crank Trigger Rings $35

    I now have one of these running a car. Joy's Daytona has one of the non-common block A/C pieces installed and working well. I gambled and installed it at about .015 on the tight side, and there's not enough runout to cause a loss of sync. This was a super easy install and I would highly recommend it if a guy wants to roll his own.

Similar Threads

  1. 36-1 Trigger Wheel Crank Pulley Adapters
    By wheming in forum Group Buys
    Replies: 82
    Last Post: 05-05-2023, 08:14 AM
  2. Feeler for crank pulley diesgned with trigger wheel mount
    By supershadow in forum Engine - Block, Piston, Heads, Intakes
    Replies: 13
    Last Post: 03-11-2016, 02:04 AM
  3. General 36-1 trigger wheel
    By lengel in forum Parts For Sale
    Replies: 4
    Last Post: 01-11-2015, 08:45 PM
  4. Engine Underdrive pulley w/ crank trigger wheel
    By SCalder in forum Parts For Sale
    Replies: 9
    Last Post: 11-26-2012, 06:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •