My Spirit has the passenger seatbelt that runs on the track in the frame. Is there a way to convert that to a regular seatbelt? The track still functions but the PO removed that belt.
My Spirit has the passenger seatbelt that runs on the track in the frame. Is there a way to convert that to a regular seatbelt? The track still functions but the PO removed that belt.
Find an earlier year and swap everything over. It all fits right in, you will need to make a nut plate for the top of the "B" pillar seat where the seat belt attaches.
On that same doner car if it has the denso A/C compressor do yourself a favor and get the manifold on the top of the compressor also.
1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
1987 Shelby CSX #418. Long term rebuild and restore ?
Thank you, any idea what year they started with the seat belt nonsense? These cars are getting hard to find in the junkyard. Also any idea what car I could get an automatic floor shift housing and cable from? I got the shifter out of a Horizon and I did get the cable but I'm guessing it's going to be too short.
The automatic seatbelt thing was 94-95 model year thing to get around the lack of a passenger side air bag.
Looks like the P and A body used the same shift cable for the floor mount. https://www.rockauto.com/en/catalog/...ift+cable,8528
Buyer's Guide : ATP Y759 Shift Cable
CHRYSLER LEBARON 1991-1992 CHRYSLER SHADOW 1991-1994 CHRYSLER SPIRIT 1992-1995 DODGE SHADOW 1991-1994 DODGE SPIRIT 1991-1995 PLYMOUTH ACCLAIM 1991-1995 PLYMOUTH SUNDANCE 1991-1994
1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
1987 Shelby CSX #418. Long term rebuild and restore ?
Posting Permissions
Reply With Quote