Results 1 to 11 of 11

Thread: Cold Enrichment Tables CurveA, B, and C

  1. #1
    Mitsu booster
    Join Date
    Feb 2009
    Location
    PA
    Posts
    25

    Cold Enrichment Tables CurveA, B, and C

    Hi All,

    For those of you running MPTUNE on a 2.2, can you share a screenshot of the (3) FuelColdEnrichmentCurve tables including the raw data? I am interested in what you guys have configured for +20, +40, or larger injectors. I am in the process of fine tuning those tables for cold start and I'm curious of how others have it configured.

    Thanks
    Mike

  2. #2
    Garrett booster
    Join Date
    Jun 2007
    Location
    Waukesha, WI
    Posts
    88

    Re: Cold Enrichment Tables CurveA, B, and C

    I haven't had to change them. I just used what MPTune scaled them too or was was already in the T-LM/SMEC cals or BoostButton templates. Although I don't often operate my TM cars in the winter.

  3. #3
    Mitsu booster
    Join Date
    Feb 2009
    Location
    PA
    Posts
    25

    Re: Cold Enrichment Tables CurveA, B, and C

    What size injectors are you using? And if you have a wideband installed, what AFR do you see in the initial one minute of your car running?

  4. #4
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,617

    Re: Cold Enrichment Tables CurveA, B, and C

    I've driven my LM cars year round, and I've never adjusted the cold enrichment curves on those cars. I generally have +40s in them. It's obviously super rich for the first minute the car is running.

  5. #5
    Garrett booster
    Join Date
    Jun 2007
    Location
    Waukesha, WI
    Posts
    88

    Re: Cold Enrichment Tables CurveA, B, and C

    I've had both stock and +40s in my LM car and never felt like they needed to be adjusted. I don't have recorded the A/F at startup but usually in the mid 10s and works its way up to 12.5 and then when done with enrichment it stays at stoich (bouncing around 14.4 to 15.1). As long as it sounds fine, doesn't stall, no excessive fuel smell, and comes up to temp fine and most importantly eventually idles around 14.7 I don't care the exact A/F at startup.

    Jeff

  6. #6
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,843

    Re: Cold Enrichment Tables CurveA, B, and C

    i havent adjusted them much either. they arent barfing fuel rich but I wouldnt mind taking a little out during really cold warmup.

    if i start it up and head out, then i cant roll into boost hardly at all or its far too rich. i just short shift for a few min and its fine.

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  7. #7
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,777

    Re: Cold Enrichment Tables CurveA, B, and C

    Quote Originally Posted by Aries_Turbo View Post
    if i start it up and head out, then i cant roll into boost hardly at all or its far too rich. i just short shift for a few min and its fine.

    Brian
    BAD Brian, no boosting on a cold engine...
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  8. #8
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,843

    Re: Cold Enrichment Tables CurveA, B, and C

    Quote Originally Posted by chromguy View Post
    BAD Brian, no boosting on a cold engine...
    not real boost.... like less than 3psi.

    brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  9. #9
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,777

    Re: Cold Enrichment Tables CurveA, B, and C

    Quote Originally Posted by Aries_Turbo View Post
    not real boost.... like less than 3psi.

    brian
    Oh OK then :-)
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  10. #10
    Mitsu booster
    Join Date
    Feb 2009
    Location
    PA
    Posts
    25

    Re: Cold Enrichment Tables CurveA, B, and C

    Thanks for the replies guys. I have similar behavior on a cold start. The AFRs are in the low 10s for about 1 min and then creep up after that. I'll keep messing with the tables and post my config when I feel like its where it should be. I would like for it to be in the 11-12s on initial start up.

  11. #11
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,617

    Re: Cold Enrichment Tables CurveA, B, and C

    Quote Originally Posted by 86sc View Post
    Thanks for the replies guys. I have similar behavior on a cold start. The AFRs are in the low 10s for about 1 min and then creep up after that. I'll keep messing with the tables and post my config when I feel like its where it should be. I would like for it to be in the 11-12s on initial start up.
    Any engine is going to be super rich on cold start when it's cold outside. The stock cals were this way too. You may be able to lean it out and have reliable starting and transition into the engine being warm, but I wouldn't count on that too much.

Similar Threads

  1. 0078 SL timing tables vs 171/641 timing tables
    By Force Fed Mopar in forum EFI Tuning
    Replies: 5
    Last Post: 07-20-2011, 10:24 PM
  2. Cuts out/misses when cold outside till it warms up. Cold weather issue not boost.
    By Darkwolf in forum The Original "Turbo Dodge" Cars
    Replies: 8
    Last Post: 12-12-2010, 02:42 PM
  3. SBEC 3D Tables
    By 1BADVAN in forum EFI Tuning
    Replies: 7
    Last Post: 02-26-2010, 10:09 PM
  4. Timing Tables
    By badandy in forum EFI Tuning
    Replies: 2
    Last Post: 12-29-2008, 04:46 PM
  5. Need to fix cold enrichment Please help
    By turbo84voyager in forum "I need help!"
    Replies: 1
    Last Post: 10-08-2008, 12:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •