Results 1 to 5 of 5

Thread: 1988 Shadow ES, streetable race car roller

  1. #1
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,803

    1988 Shadow ES, streetable race car roller

    Date: 03rd April 2023
    Username: Pat
    Full Name: Pat Culkin
    City, State, Zip: Rockville, MD
    Contact: PM
    Selling or Wanted Price: $3500

    I think it's time to let the Shadow go. I've owned this car for over 20 years at this point. It's a killer start for someone who wants to drop their drivetrain and stand alone of their choice into something and immediately go racing, on drag and drive events, autocross, etc.

    I've changed the car up a number of times over the years, but the one consistency has been that it was built to not be a one trick pony. It's won autocrosses, drag events, won the Grassroots Motorsports $2000 Challenge in 2013, won again in the $1000 class in 2014, won car show awards, has won the Spirit of SDAC award, been land speed raced at the Maxton Mile, been on 5 Drag Weeks and did MidWest Drags once and has been a street car. It has done it all.

    Below is a long, long description which hopefully will answer most questions. I know that this thing is not for everyone, but for the right person, this is a deal and a half. Prefer to sell whole. Not considering parting at this point, so please don't ask.

    Body/Interior:
    • 6 point roll bar, 1 Ύ .120 wall DOM tubing
    • Straight, no rust
    • Blitz black paint done in 2017 or 2018. Shows pretty well.
    • Replaced the window felt strips when I painted it
    • Lexan hatch and rear quarter windows
    • Hatch, hood lightened
    • Lightened bumpers
    • Some lightening of inner door structures (crash bars, window rollers intact)
    • ’90 hood and upper core support
    • Lower core support cut out, rebuilt with .120 wall tubing with gussets. Repositioned radiator mounts to lower and move radiator forward to fit late model/larger G body T1 radiator and fan (included with the car). Faced the core support with sheet steel to run air through radiator.
    • Lower core support also has mounts on it to support intercooler (see pictures). Intercooler is a Precision bar/plate 750hp unit(will include with car). Intercooler pipe pass throughs are welded into core support sheet metal and come up on either side of the engine bay. Makes for easy piping and keeps the engine bay fully sealed off from front end air
    • No heater box
    • Firewall holes welded shut with exceptions for stock harness grommet and two grommets on passenger side
    • ’90 body harness (stripped to essentials)
    • ’90 engine harness stripped to run lights and ignition only
    • ’90 dash and gauge cluster
    • BeCool heat suppression/sound deadener on inside of firewall, and rear floor areas. Stock carpet up front
    • Bolt on trailer hitch (can leave if you want it)
    • Spare tire well cut out, steel fuel cell box welded in. Sealed/latching access door in hatch
    • Driver and passenger Kirkey Pro Drag seats (17”) and black tweed Kirkey seat covers, mounted on kirkey seat brackets and bolted to modified P body seat mounts. Bolts into floor in stock locations. Drivers side has back brace to harness bar
    • G force 5 point quick release harnesses (drivers side expires in June 2023)
    • With full cell, trailer hitch, bumpers, T3 motor (heavy), full nitrous bottle, 3” exhaust to the bumper, it weighs just over 2550lbs without driver.

    Fuel System
    • 8 gallon RCI cell with foam
    • Fragola PTFE fuel lines and fittings
    o -10 cell to Aeromotive 100 micron pre filter, AEM 400lph external pump, Aeromotive 10 micron filter, -8 to engine back, -6 return to cell.
    o 10 ga wiring to/from fuel pump to engine bay

    Suspension/Steering
    • Dual pivot cast arm K frame, new poly bushings last year, new ball joints
    • Rear:
    o Converted to use 2.5” coil over springs with adjustable perches. Currently has 400 lb rear springs
    o Koni shocks
    o Adjustable panhard bar
    • Front:
    o Koni shock housings with Koni race adjustable inserts. Inserts are new
    o Converted to adjustable coil overs, 450 lbs springs
    o Ground Control caster/camber plates (new)
    • Manual steering rack. Plastic bushing (that often breaks) replaced with bronze bushing. New inner and outer tie rod ends. Can give you a power rack if you’d prefer to switch back

    Brakes/hubs:
    • Newer 24mm master cylinder
    • Braided brake hoses
    • Front are 60mm calipers, vented 10” discs, ’91 knuckles with bolt in hubs, long wheel studs
    • Rear are 10” vented disks from a ’91, long wheel studs

    Other
    • 523/568 shifter, modified to shorten through and keep stock stick position
    • Cables are there also, with newer poly bushings in them
    • 1 year old Miata battery in it…goes with the car. Fits in the track and bracket I made for it.

    NOTE: None of the wheels/tires in pics are included in the sale. I'll look for rollers to throw on it or buyer can bring wheels they want to put on.

    Any questions, feel free to ask.

    Thanks,
    Pat

    - - - Updated - - -

    More pics...
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ext 2.jpg 
Views:	140 
Size:	734.8 KB 
ID:	66239   Click image for larger version. 

Name:	ext 4.jpg 
Views:	131 
Size:	1.02 MB 
ID:	66238   Click image for larger version. 

Name:	ext 3.jpg 
Views:	122 
Size:	1.04 MB 
ID:	66237   Click image for larger version. 

Name:	rad 3.jpg 
Views:	121 
Size:	673.3 KB 
ID:	66249   Click image for larger version. 

Name:	ext 5.jpg 
Views:	125 
Size:	1.04 MB 
ID:	66240   Click image for larger version. 

Name:	rad 2.jpg 
Views:	130 
Size:	753.0 KB 
ID:	66248  

    Click image for larger version. 

Name:	ext 1.jpg 
Views:	116 
Size:	859.4 KB 
ID:	66241   Click image for larger version. 

Name:	int1.jpg 
Views:	139 
Size:	896.9 KB 
ID:	66242   Click image for larger version. 

Name:	int 2.jpg 
Views:	136 
Size:	855.1 KB 
ID:	66243   Click image for larger version. 

Name:	int 3.jpg 
Views:	107 
Size:	1,003.9 KB 
ID:	66244   Click image for larger version. 

Name:	int 5.jpg 
Views:	114 
Size:	926.2 KB 
ID:	66245   Click image for larger version. 

Name:	int 4.jpg 
Views:	119 
Size:	786.5 KB 
ID:	66246  

    Click image for larger version. 

Name:	rad 1.jpg 
Views:	109 
Size:	635.5 KB 
ID:	66247   Click image for larger version. 

Name:	rad 4.jpg 
Views:	134 
Size:	581.4 KB 
ID:	66250   Click image for larger version. 

Name:	rad 5.jpg 
Views:	116 
Size:	620.9 KB 
ID:	66251   Click image for larger version. 

Name:	susp 1.jpg 
Views:	103 
Size:	625.7 KB 
ID:	66252   Click image for larger version. 

Name:	susp 2.jpg 
Views:	99 
Size:	657.7 KB 
ID:	66253   Click image for larger version. 

Name:	susp 3.jpg 
Views:	129 
Size:	879.5 KB 
ID:	66254  

    Last edited by Pat; 04-03-2023 at 09:15 PM.

  2. #2
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,803

    Re: 1988 Shadow ES, streetable race car roller

    More pics....and a couple of action shots from over the years just for fun.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	under 2.jpg 
Views:	128 
Size:	657.6 KB 
ID:	66256   Click image for larger version. 

Name:	under 3.jpg 
Views:	105 
Size:	699.2 KB 
ID:	66257   Click image for larger version. 

Name:	under 6.jpg 
Views:	130 
Size:	712.6 KB 
ID:	66255   Click image for larger version. 

Name:	under 4.jpg 
Views:	115 
Size:	700.8 KB 
ID:	66258   Click image for larger version. 

Name:	under 5.jpg 
Views:	103 
Size:	800.4 KB 
ID:	66259   Click image for larger version. 

Name:	under 1.jpg 
Views:	129 
Size:	656.6 KB 
ID:	66260  

    Click image for larger version. 

Name:	mwd1.jpg 
Views:	110 
Size:	369.9 KB 
ID:	66261   Click image for larger version. 

Name:	mwd2.jpg 
Views:	97 
Size:	272.2 KB 
ID:	66262   Click image for larger version. 

Name:	dw3.jpg 
Views:	106 
Size:	120.9 KB 
ID:	66263   Click image for larger version. 

Name:	ax2.jpg 
Views:	116 
Size:	132.6 KB 
ID:	66264   Click image for larger version. 

Name:	ax1.jpg 
Views:	95 
Size:	96.8 KB 
ID:	66265   Click image for larger version. 

Name:	grm1.jpg 
Views:	105 
Size:	129.3 KB 
ID:	66266  


  3. #3
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,803

    Re: 1988 Shadow ES, streetable race car roller

    Sale pending.

  4. #4
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,803

    Re: 1988 Shadow ES, streetable race car roller

    Quote Originally Posted by pat View Post
    sale pending.
    sold!

  5. #5
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,812

    Re: 1988 Shadow ES, streetable race car roller

    😭

    Sent from my KB2005 using Tapatalk
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

Similar Threads

  1. For Sale T2/568 GLHT race car, complete, roller, or part-out
    By sy2206 in forum Cars
    Replies: 12
    Last Post: 08-10-2012, 10:49 PM
  2. Engine Race only roller cam
    By SCalder in forum Parts For Sale
    Replies: 8
    Last Post: 03-26-2009, 08:56 AM
  3. Wanted Shadow(Roller)
    By moparfwdsleeper in forum Cars
    Replies: 5
    Last Post: 03-13-2009, 08:12 PM
  4. For Sale 92 Shadow ES Race Roller...
    By Frank in forum Cars
    Replies: 20
    Last Post: 03-22-2008, 01:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •