Page 1 of 5 12345 LastLast
Results 1 to 20 of 91

Thread: Microsquirt

  1. #1
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Microsquirt

    I'm toying with the idea of putting g mircosquirt in. My omni when I get it running. I don't need anything more than what the factory gave us for the most part. I do want to keep some sort of knock retard feature, which seems li,e an add on for this product.

    I know tryingbe has done this conversion, but I'm wondering if there are others out there.

    Furthermore, I'm fond of the hep. Is there a proximity sensor option which could work there or perhaps just the option to keep the stock hep I know I'm not the only one to actually have really good luck with them over the years, on average.

    Also, is the cost to do this whole thing such that I might as well go full MS3 because the overall percentage increase in price isn't that significant by the time I'm done?

    If I could easily do this for under 1k, I'll be kicking myself for not doing it sooner...

  2. #2
    turbo addict
    Join Date
    Feb 2008
    Location
    york pa
    Posts
    1,823

    Re: Microsquirt

    Why not just do a crank trigger and get rid of the distributor all together. Thats good enough for wasted spark

  3. #3
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Quote Originally Posted by bgbmxer View Post
    Why not just do a crank trigger and get rid of the distributor all together. Thats good enough for wasted spark
    I'm a little leery of mounting the sensor down there for a car which will see all weather conditions.

  4. #4
    turbo addict
    Join Date
    Feb 2008
    Location
    york pa
    Posts
    1,823

    Re: Microsquirt

    Quote Originally Posted by cordes View Post
    I'm a little leery of mounting the sensor down there for a car which will see all weather conditions.
    Hall sensor will not care what so ever.

  5. #5
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Quote Originally Posted by bgbmxer View Post
    Hall sensor will not care what so ever.
    But the bracket and everything might if I run over something or a rock gets kicked up there. Are they weatherproof?

  6. #6
    turbo addict
    Join Date
    Feb 2008
    Location
    york pa
    Posts
    1,823

    Re: Microsquirt

    Odds of a rock getting inbetween are super low. Also yes its all waterproof.

  7. #7

    Re: Microsquirt

    I would also say go with a hall-effect sensor on the crank wheel... Generally a trigger on the crank will be more accurate (no belt to stretch or shrink...)

    As for the distributor, you could keep it or get rid of it. I would likely get rid of it... A waste spark coil pack will be reliable and eliminates a small amount of drag on the engine.

    On Microsquirt vs MS3. Not sure where prices are right now, but since you only need two spark outputs, I would say Microsquirt unless you want to mount the controller underhood (MS3Pro) or you want to go with Coil Per Plug... Or you want logging without a PC.

  8. #8
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,357

    Re: Microsquirt

    This is my cost from 2017. You'll need to update it and see if you can do it cheaper.

    MicroSqurit Total Cost -$1,470

    36-1 wheel welded to crank -$100
    Balanced crank pulley -$74.31
    Microsquirt + 8 ft harness -$369
    36-1 wheel -$32.00
    crank sensor -$43
    QuadSpark -$89.00
    MAP sensor connector -$8.50
    MAT sensor connector -$10.00
    ECT sensor connector -$10.00
    TPS sensor connector -$10.00
    420A wires -$20
    420A coil -$20
    Wiring Connector packs -$30
    USB to serial -$15
    Misc wires -$40
    Uninsulated crimp -$20
    Crimp tool -$13
    Shrink Wrap -$10
    Misc bolts -$15
    Relay -$15
    Fusebox -$25
    Fuses -$5
    E85 sensor + connector -$80
    Injector resistor -$30
    Wire loop -$20
    On/Off 12v valve for idle control -$30
    3m tape -$6
    Tuner Studio and Megaviewer -$79.95
    lilknockmeter -$119.95
    BOSCH knock sensor 0261231038 -$25.00
    TPS connector for knock sensor -$11.95
    step down stud for knock sensor N90905502 -$2.49

  9. #9
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Thanks a ton for that cost breakdown. I doubt much could be shaved off of that, so it's a very good baseline. I tend to go crazy when it comes to spending money on wiring, so that won't help things.

  10. #10
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Picked up a microsquirt. It looks like I can use the hep, so that's what I will try first. If anyone has first hand experience with this, I would love some input.

  11. #11
    turbo addict
    Join Date
    Feb 2008
    Location
    york pa
    Posts
    1,823

    Re: Microsquirt

    Quote Originally Posted by cordes View Post
    Picked up a microsquirt. It looks like I can use the hep, so that's what I will try first. If anyone has first hand experience with this, I would love some input.
    I have heard that it works but then heard multiple times it doesn't. I think you could make it into a trigger wheel tho

  12. #12
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Quote Originally Posted by bgbmxer View Post
    I have heard that it works but then heard multiple times it doesn't. I think you could make it into a trigger wheel tho
    I guess we'll see. I would think it should work just fine as chrysler used the stock hep to do sequential and were just asking for the same old batch fire injection from the mid 80s.

  13. #13
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,803

    Re: Microsquirt

    I'm using Microsquirt with a hall effect crank trigger on my T3 Shadow. So far, I've really liked it. The car makes more power and is more consistent than I was ever able to get it on factory electronics. There are trade offs...cold start, cold drivability etc. is very difficult to achieve at the same quality level you get from the factory ECU. If you try, doing it all for under $1k is definitely doable.

    If you want to use the distributor/HEP, you should consider talking to Reeves. He may have some insight to share that could help you.

  14. #14
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Thanks Pat. Il contact Reeves and see what he has to say. I didn't realize he was using the hep.

  15. #15
    Supporting Member Turbo Mopar Contributor
    Join Date
    Oct 2008
    Location
    Syracuse, NY
    Posts
    65

    Re: Microsquirt

    I'm just starting to install a Microsquirt on my 2.2L T2 setup, but had to buy a wideband converter kit, because Micro doesn't support wideband. That raises the price even closer to Mega, which does support wideband.

  16. #16
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Quote Originally Posted by LaserDad View Post
    I'm just starting to install a Microsquirt on my 2.2L T2 setup, but had to buy a wideband converter kit, because Micro doesn't support wideband. That raises the price even closer to Mega, which does support wideband.
    I have a couple of the controllers lying around or in cars already, so that wasn't a huge deal for me. While I can't imagine it with a boosted application, a one wire nb sensor would be more than fine for a lot of builds.

  17. #17
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,357

    Re: Microsquirt

    Quote Originally Posted by Pat View Post
    There are trade offs...cold start, cold drivability etc. is very difficult to achieve at the same quality level you get from the factory ECU.
    Add more fuel to Priming Pulse, Cranking Pulse, AfterStart Enrichment, Warmup Enrichment.

    https://www.msextra.com/forums/viewtopic.php?t=46234

  18. #18
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,596

    Re: Microsquirt

    Thanks for the link to the driveability thread.

    Is everyone just using resistors, or are they buying new injectors? I saw where some people had some fairly large heat sinks for the injectors. I would like to avoid that if possible.

  19. #19
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,357

    Re: Microsquirt

    Quote Originally Posted by cordes View Post
    Thanks for the link to the driveability thread.

    Is everyone just using resistors, or are they buying new injectors? I saw where some people had some fairly large heat sinks for the injectors. I would like to avoid that if possible.
    I used a Volvo resistor. I'm sure you can find it much cheaper used at http://forums.turbobricks.com/

    One wire in from 12v source, four wires out connected to the four injectors, then the other injectors wires goes to the ecu.

    https://www.ebay.com/itm/32516682907....c100667.m2042

  20. #20
    ...if you know what I mean... Turbo Mopar Contributor csxtra's Avatar
    Join Date
    Dec 2005
    Location
    Cincinnati OH
    Posts
    830

    Re: Microsquirt

    Brian,

    A reasonably-priced option for high impedance fuel injectors is SnakeEater performance. Their 57pph injectors are about $48 each:
    https://www.snakeeaterperformance.co...32517902696497

    They also have higher-flowing options for just a few $$ more.
    Warren Hall
    "My Name is Warren and my car is an alcoholic..."
    OVC - SDAC "Our Sh*t Rolls!"
    Cincinnati, OH
    87 CSX # 741
    317WHP - 380 WFt-Lbs (STD-5)
    12.460 @ 113.2 - Race Gas + Methanol Injection
    12.749 @ 109.84 - 91 octane + Methanol Injection (Still tuning...)
    "Illegitimi non carborundum."
    -General Joseph Stillwell
    TD Runlogger Page Has Moved...

Page 1 of 5 12345 LastLast

Similar Threads

  1. Replies: 67
    Last Post: 09-23-2023, 09:21 PM
  2. Microsquirt v3 trigger wheel?
    By dartswinger in forum EFI Tuning
    Replies: 1
    Last Post: 05-29-2019, 11:15 PM
  3. Megasquirt / Microsquirt introduction (getting your feet wet) guide.
    By tryingbe in forum Electrical & Fuel System
    Replies: 7
    Last Post: 03-09-2018, 11:08 PM
  4. General Going to Microsquirt sale! Socketed LM, PM, Ostrich, new HEP, etc
    By tryingbe in forum Parts For Sale
    Replies: 4
    Last Post: 05-03-2017, 01:22 PM
  5. anyone microsquirt there motorcycle? need input
    By bgbmxer in forum Other vehicles
    Replies: 0
    Last Post: 03-12-2009, 08:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •