Results 1 to 3 of 3

Thread: Wire loom routing clips

  1. #1
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Wire loom routing clips

    All I can find on the internet is the bulk packages of the under hood wiring harness clips which you stick along the fire wall to hold the harness in place. Does anyone have a link to the proper size handy? I ordered up a kit some time back and it was about 20 bucks for a kit which had maybe three of the size I needed and I'd like to avoid the same thing happening this time.

    I don't mind a few sizes if they're common to our cars, and I wouldn't mind getting some which have the tang to tape to the loom and you then push then through. Almost all of those on the Shelby lancer 8mhave are broken.

  2. #2
    Mitsu booster
    Join Date
    Apr 2006
    Location
    covington,tn
    Posts
    45

    Re: Wire loom routing clips

    Try here
    https://www.clipsandfasteners.com/default.asp

    Sent from my SM-G960U using Tapatalk

  3. #3
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Wire loom routing clips

    Will do. Thanks james.

Similar Threads

  1. Door Panel Clips/Drip Moulding clips
    By badandy in forum Interior & Exterior Restoration
    Replies: 9
    Last Post: 06-23-2009, 04:38 PM
  2. 3 wire o2. I have a 4 wire plug. 1 wire harness.
    By 85_600 in forum Electrical & Fuel System
    Replies: 10
    Last Post: 05-27-2006, 11:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •