Results 1 to 5 of 5

Thread: GLHS or 1986/87 L-Body T1 Engine Wiring Harness

  1. #1
    Garrett booster
    Join Date
    Sep 2009
    Location
    Cleveland, OH
    Posts
    142

    GLHS or 1986/87 L-Body T1 Engine Wiring Harness

    Looking for an L-Body T1(turbo 1) Engine wiring harness for a SC project. Will also take GLHS L-body engine wiring harness.
    This is for my brother's Shelby Charger project.
    (two1six) two3five-9eight9one call or text
    going to 44121 in OH.
    Thanks, Michael

  2. #2
    Garrett booster
    Join Date
    Sep 2009
    Location
    Cleveland, OH
    Posts
    142

    Re: GLHS or 1986/87 L-Body T1 Engine Wiring Harness

    Was hoping to get some one on this. Thanks

  3. #3
    Supporting Member Turbo Mopar Contributor GLHS60's Avatar
    Join Date
    Dec 2005
    Location
    Sherwood Park Alberta, Canada
    Posts
    1,640

    Re: GLHS or 1986/87 L-Body T1 Engine Wiring Harness

    I have a nice L-body T-I harness that is missing the bulkhead connector.

    Nice in that it's not burnt or all brittle.

    Thanks
    Randy


    There is no logical reason to call an Engine a motor.

    Randy Hicks
    86 GLHS60
    86 GLHS 373 : SOLD, but never forgotten
    89 Turbo Minivan
    83 Turbo Rampage : SOLD
    Edmonton,Alberta,Canada

  4. #4
    Mitsu booster Turbo Mopar Contributor
    Join Date
    Sep 2021
    Location
    Farmington, NM
    Posts
    23

    Re: GLHS or 1986/87 L-Body T1 Engine Wiring Harness

    Quote Originally Posted by GLHS60 View Post
    I have a nice L-body T-I harness that is missing the bulkhead connector.

    Nice in that it's not burnt or all brittle.

    Thanks
    Randy
    How are the wires where it goes into the PM? Interested in what you have. Mine is so brittle the wires are bare at the PM connector, and when it gets wet under the hood, it leaves me stranded. Have been contemplating a standalone, or converting to SMEC/SBEC, but I am finding out with two TD's on jackstands, I do not have the time to do these invasive projects.

    Thanks!

  5. #5
    Supporting Member Turbo Mopar Contributor GLHS60's Avatar
    Join Date
    Dec 2005
    Location
    Sherwood Park Alberta, Canada
    Posts
    1,640

    Re: GLHS or 1986/87 L-Body T1 Engine Wiring Harness

    The PM and LM connectors and wires are still nice and un-brittle.

    The bulkhead connector was removed as the PO was going to swap it in 50 pin car.

    I bought it for my Rampage Turbo project but a stroke prevents me from continuing.

    Thanks
    Randy


    There is no logical reason to call an Engine a motor.

    Randy Hicks
    86 GLHS60
    86 GLHS 373 : SOLD, but never forgotten
    89 Turbo Minivan
    83 Turbo Rampage : SOLD
    Edmonton,Alberta,Canada

Similar Threads

  1. Electronics L-body Super 60 wiring harness or new/nearly new GLHS Wiring harness
    By 1984rampage in forum Parts Wanted
    Replies: 3
    Last Post: 05-29-2013, 01:22 PM
  2. Electronics WTB - '88-'89 engine wiring harness (turbo P body)
    By Pat in forum Parts Wanted
    Replies: 5
    Last Post: 05-29-2013, 12:38 PM
  3. Electronics wtb 1990 A body t1 engine wiring harness
    By bgbmxer in forum Parts Wanted
    Replies: 0
    Last Post: 09-27-2010, 09:27 PM
  4. L-Body engine bay wiring harness
    By rich tideswell in forum Electrical & Fuel System
    Replies: 19
    Last Post: 08-08-2010, 02:11 AM
  5. L-body Engine wiring harness ?s
    By I wear pants in forum Electrical & Fuel System
    Replies: 5
    Last Post: 06-03-2008, 02:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •