I am not new to turbos but new to ones this small. I can do any modification to the turbo as long as the inducer and leading edge of wheel is the stock diameter +2mm
E = 1.683 Compressor wheel diameter 1.707 Compressor housing diameter
This is a draw through type turbo.
What is the nomenclature of this one.

I will be trying to turn the motor as hard as possible and stalling the convertor where it makes peak power. I'll be on engine dyno this winter beating on this motor. I'm yold that rpm will be peak power around 5000 to 5500 and peak RPM around 7500 to 8000

I would like to buy some stiock core parts
looking for a few common blocks and 2.2 cranks