Results 1 to 5 of 5

Thread: 1984 Turbo for Stock Eliminator

  1. #1
    Mitsu booster Turbo Mopar Contributor
    Join Date
    Sep 2021
    Location
    Aledo Texas
    Posts
    29

    1984 Turbo for Stock Eliminator

    I am not new to turbos but new to ones this small. I can do any modification to the turbo as long as the inducer and leading edge of wheel is the stock diameter +2mm
    E = 1.683 Compressor wheel diameter 1.707 Compressor housing diameter
    This is a draw through type turbo.
    What is the nomenclature of this one.

    I will be trying to turn the motor as hard as possible and stalling the convertor where it makes peak power. I'll be on engine dyno this winter beating on this motor. I'm yold that rpm will be peak power around 5000 to 5500 and peak RPM around 7500 to 8000

    I would like to buy some stiock core parts
    looking for a few common blocks and 2.2 cranks

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,463

    Re: 1984 Turbo for Stock Eliminator

    Best of luck. Can you bore outthe throttle body? That is the incredibly huge bottle neck in the system.

  3. #3
    turbo addict
    Join Date
    Dec 2005
    Location
    Lincoln, Nebraska
    Posts
    2,626

    Re: 1984 Turbo for Stock Eliminator

    If rules allow, do some work on the throttle body for sure. Either way, having the ais open 100% at high throttle wouldn't hurt.
    If the people of the nation understood our banking and monetary system, I believe there would be a revolution before tomorrow morning. -Henry Ford

  4. #4
    Mitsu booster Turbo Mopar Contributor
    Join Date
    Sep 2021
    Location
    Aledo Texas
    Posts
    29

    Re: 1984 Turbo for Stock Eliminator

    Quote Originally Posted by cordes View Post
    Best of luck. Can you bore out the throttle body? That is the incredibly huge bottle neck in the system.
    <br><br>nope You can not modify the throttle body&nbsp;<br><br>If the throttle body as after the turbo than you can do a lot more.&nbsp; I am going to get the turbo built and put the max on the compressor side and go dramatically bigger on the turbine side&nbsp;<br>I am looking a some of the original stock eliminator build and they were turning extremally high rpms&nbsp;<br>
    <br>

  5. #5
    Supporting Member II Turbo Mopar Contributor Shadow's Avatar
    Join Date
    Dec 2006
    Location
    Aubigny, Manitoba, Canada
    Posts
    5,088

    Re: 1984 Turbo for Stock Eliminator

    If you are allowed to change the 2 1/4" stock style swing valve, put a Mandrel exit on it!

    Also, make sure to run a high PR compressor wheel, so Taller if possible, as your pulling through the restriction of the TB and wanting as much boost as possible.

    I may have a solution to this over the next year as I have been working out a stock sized bolt on Billet compressor for this application that should be capable of 300WHP+ and 40psi

    Robert Mclellan
    http://www.youtube.com/watch?v=wambNdfnu5M
    10.04 @ 143.28mph (144.82 highest mph)
    Worlds fastest 8v MTX Shelby Charger
    Manitoba's Fastest 4cyl!
    8 valve, No Nitrous!
    New clutch combo is the SH!T!

Similar Threads

  1. NHRA check list for Stock Eliminator
    By Comp461 in forum The Original "Turbo Dodge" Cars
    Replies: 53
    Last Post: 08-14-2022, 05:21 AM
  2. Replies: 1
    Last Post: 07-17-2022, 05:40 PM
  3. Turbos/Intercoolers Cut-Out Eliminator
    By minigts in forum Parts For Sale
    Replies: 5
    Last Post: 11-14-2008, 01:16 PM
  4. TD's For Stock Eliminator Question
    By Captain Chaos in forum Events, Racing, & Results!
    Replies: 31
    Last Post: 03-22-2008, 11:41 PM
  5. Replies: 11
    Last Post: 10-26-2007, 04:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •