Results 1 to 8 of 8

Thread: SBEC 5V power supply linear regulators

  1. #1
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    SBEC 5V power supply linear regulators

    I found a few super low drop out (LDO) for SBEC 5V power supply linear regulators. Once I verify functionality, I will share part numbers. Next, I need to figure out the 5V regulator used in the SMEC, The good news is the 5V linear supplies in the SMEC and SBEC seem to be very solid. So far I have not found a faulty one. The 8 V DC-DC supply on the SBEC is known to burn up, I have several that have burnt through the PCB.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,429

    Re: SBEC 5V power supply linear regulators

    I think I just had the 8v supply for the HEP fail on the LM for the Daytona. I really need to dig into this with my father more.

  3. #3
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,838

    Re: SBEC 5V power supply linear regulators

    subscribed to keep this thread in my list...

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  4. #4
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: SBEC 5V power supply linear regulators

    Quote Originally Posted by cordes View Post
    I think I just had the 8v supply for the HEP fail on the LM for the Daytona. I really need to dig into this with my father more.
    Let me know, if you need info. Check the two caps on the Power board. I do find the 8V cap needs replacing
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  5. #5
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,429

    Re: SBEC 5V power supply linear regulators

    Will do. I think the power module is fine, as the new lm is working well. Or, are you suggesting that the caps on the PM might be killing my LMs?

  6. #6
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: SBEC 5V power supply linear regulators

    Brian, bring your Power board to SDAC and I will check the caps for you. No charge. If the cap are bad, I will have spare caps with me.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  7. #7
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,429

    Re: SBEC 5V power supply linear regulators

    Sounds like a plan. I really appreciate it.

  8. #8
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: SBEC 5V power supply linear regulators

    Or any other ECU you want tested. I can test caps quickly
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

Similar Threads

  1. Injectors, Regulators, and MPTune.
    By Fenderbass in forum EFI Tuning
    Replies: 12
    Last Post: 10-10-2020, 09:11 PM
  2. Converting from Logic module-Power module to SBEC. Pros and cons
    By 135sohc in forum Electrical & Fuel System
    Replies: 4
    Last Post: 07-25-2016, 12:57 PM
  3. Turbos/Intercoolers stock TIII turbo oil supply line or braided oil supply line.
    By Xtrempickup in forum Parts Wanted
    Replies: 7
    Last Post: 08-29-2013, 02:53 PM
  4. Interior WTB Power window regulators 85 600
    By guyd_15 in forum Parts Wanted
    Replies: 2
    Last Post: 10-03-2009, 10:26 PM
  5. 2.4L Coolant supply to the turbo?
    By BadAssPerformance in forum 2.0L/2.4L 16V Engine Swaps!
    Replies: 20
    Last Post: 08-23-2007, 12:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •