Results 1 to 9 of 9

Thread: Returning to the turbo dodge scene

Hybrid View

  1. #1
    Garrett booster
    Join Date
    Jul 2011
    Location
    michigan
    Posts
    69

    Returning to the turbo dodge scene

    Hi everyone I am very close to finalizing buying a couple project cars back that were sold 8 years ago....Unfortunately I do not know its current state and it sounds like it has been sitting and the parts it had sounds like are no longer available like the eibach springs. When sold the car was running a 88 2.2 t2 motor in excellent shape with the 3 bar map, +40s and boostbutton stage 5 sbec pm. The only issue it was experiencing was a short in the fuel injector harness when i had it.

    I will also be getting a 90 shelby daytona vnt rolling shell and the 2.2 motor that came with car that supposedly was rebuilt with its suppose to have all forged internals and venolia fored .030 pistons, a forward motion performance cam, ported and polished head etc....but yes I put a couple drops in the cylinders and it jumped from 75-100 psi so i will be taking a part and seeing what I have and putting it back together are all the stage 5 parts still available?

    The following "mods" have been installed on the car:

    • 17" Speedy Rims (Very light weight at under 20 lbs per rim)
    • Eibach springs
    • KYB shocks/struts
    • Forward Motion strut tower bar
    • Forward Motion rear panhard bar
    • Intercooler from diesel Fuso truck with 2.5" mandrel-bent piping
    • TiAL "Q" Blow-off valve
    • Accufab Fuel-pressure regulator
    • Mopar "804" injectors
    • Denso Iridium Spark Plugs
    • MSD Blaster 2 Coil
    • MSD SCI Ignition Box
    • 52 mm throttle body
    • Taylor 9 mm spark plug wires
    • Walbro 255 l/hr fuel pump
    • FWD Performance "G-valve" boost controller (set to 12 psi)
    • FWD Performance Grounding Kit
    • FWD Performance transmission cooler
    • Gauges on A-pillar (Vacuum/boost, Air/Fuel, & Oil Pressure)
    • Low-restriction OBX muffler



  2. #2
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,838

    Re: Returning to the turbo dodge scene


    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  3. #3

    Re: Returning to the turbo dodge scene

    Welcome back
    best 1/8 ET-6.16 sec. best 1/8 speed-119.70 Best 1/4 MPH 145.5, Best 1/4 ET 9.65 sec. 8 valve NO NITROUS!!

  4. #4
    Mitsu booster
    Join Date
    Dec 2013
    Location
    chatham VA
    Posts
    21

    Re: Returning to the turbo dodge scene

    Youre coming back, im just starting. Im glad i found this one. I hope you dont mind a friends request and noob questions?😅

  5. #5
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Returning to the turbo dodge scene

    Welcome back. They always come back!

  6. #6
    Garrett booster
    Join Date
    Dec 2006
    Location
    Hartford City, Indiana, United
    Posts
    209

    Re: Returning to the turbo dodge scene

    I did the same thing back in 2009, traded the GLH off. Went thru a few other turbo cars trying to replace what i had. Was lucky enought to find another gold GLHT like i had. Never again! lol

  7. #7
    Garrett booster
    Join Date
    Jul 2011
    Location
    michigan
    Posts
    69

    Re: Returning to the turbo dodge scene

    Thanks and what would be the question Deadpool?

  8. #8
    Mitsu booster
    Join Date
    Dec 2013
    Location
    chatham VA
    Posts
    21

    Re: Returning to the turbo dodge scene

    Mostly just advice and knowledge that i may gain from guys who been here a long time. I know the forums have droves of knowledge here but its slow going sifting through a lot of the threads.

    Its hard to find people still actively making things for these cars now. And most the older members that use to offer services either dont any more or they are inactive on here.

  9. #9
    Garrett booster
    Join Date
    Jul 2011
    Location
    michigan
    Posts
    69

    Re: Returning to the turbo dodge scene

    what kind of car? and what kind of work are you trying to get done to it?

    - - - Updated - - -

    BC Coilover Products (freeshell.org) Deadpool if this is still available it appears to be the only type of performance suspension available aftermarket as straight bolt on

Similar Threads

  1. returning to the 3-4 gate problem
    By shadow88 in forum Transmission
    Replies: 6
    Last Post: 12-09-2018, 12:31 PM
  2. Steering wheel not returning to center
    By turbodaytona87 in forum "I need help!"
    Replies: 31
    Last Post: 08-08-2013, 10:17 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •