Figured I'd make a project log thread as things are starting to come together finally!

I'll update periodically with pictures in my Google Photos album here: https://photos.app.goo.gl/gGdRGz9kbrTastqr9

You can also follow along on TD.com where I'll likely add more detail - https://www.turbododge.com/threads/8.../#post-4534734

The engine was bored .020 and has wiseco pistons, freshened and balanced crank.

New oil pump.
New intermediate shaft bearings.
New turbo (stock specs) from TU, with a brand new CHRA instead of refurbished.
ARP head studs.

We have a really good head shop here that went through my head. They helicoiled some buggered threads like the thermostat housing, a couple for the valve cover, etc.

Head was shaved just a tad for flatness.
Also had them put together the 3.3l spring and GM retainer mod for me, and did a beautiful job.

3-angle valve job and new valve guides.

New rockers from FWDP
Fidanza cam sprocket from TU
NOS cam found on eBay

A555 tranny completely gone through by Ed Papp, along with his signature bronze shift pads and a chrome-moly plate added.

These are just the big things, and I'm likely forgetting something ha.

Hoping to have everything together soon!