Results 1 to 3 of 3

Thread: Hose from Crankcase Separator to intake

  1. #1
    Mitsu booster
    Join Date
    Jan 2021
    Location
    Michigan
    Posts
    7

    Hose from Crankcase Separator to intake

    Hey guys, going through redoing the cooling system on my 91 R/T, noticed a bunch of oil on the intake figured it was a bad PCV or boot, replaced both of those. When pulling the separator (lil black box thingie below fuel rail) discovered the hose to the intake is toast. It’s split and runs deep into the intake past the runners.

    Is there an easy way to replace this short of pulling the intake, and the fuel rail etc? All the coolant stuff is out of the way at this point but I’m really starting to get frustrated with this car. It’s a clean 70k mile car but it’s been one thing after another and almost to the point of listing it and just walking away. Seems like everything I do to make it a more reliable car causes me to find another thing wrong.

    https://ibb.co/sQ6jG6H

  2. #2
    turbo addict
    Join Date
    Dec 2005
    Location
    Lincoln, Nebraska
    Posts
    2,626

    Re: Hose from Crankcase Separator to intake

    It can be done w/o pulling the intake. The new hose is just a slip fit, putting a small amount of lube on it will help it slide offer the nipple on the block.

    If you decide to pull the intake, no real need to pull the injectors & rail.
    “If the people of the nation understood our banking and monetary system, I believe there would be a revolution before tomorrow morning.” -Henry Ford

  3. #3
    Mitsu booster
    Join Date
    Jan 2021
    Location
    Michigan
    Posts
    7

    Re: Hose from Crankcase Separator to intake

    Yeah I just got it back together this morning. Just a moment of weakness in trying to get this thing back together.

Similar Threads

  1. Crankcase evacuation using turbo intake.
    By ShadowFromHell in forum Engine - Block, Piston, Heads, Intakes
    Replies: 19
    Last Post: 10-16-2015, 06:33 AM
  2. Exhaust i need HOSE-CRANKCASE VALVE mopar 4387568
    By currobar in forum Parts Wanted
    Replies: 0
    Last Post: 08-31-2012, 11:18 PM
  3. Cold air intake flex hose
    By LeBaronMike in forum Turbos & Intercoolers!
    Replies: 8
    Last Post: 07-08-2012, 04:11 PM
  4. Turbos/Intercoolers Air intake hose
    By plumkrzy3 in forum Parts Wanted
    Replies: 1
    Last Post: 01-08-2011, 09:18 PM
  5. Turbos/Intercoolers Turbo intake hose
    By marc in forum Parts Wanted
    Replies: 0
    Last Post: 09-07-2009, 07:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •