Results 1 to 7 of 7

Thread: TIII BOLT needed

  1. #1
    Hybrid booster
    Join Date
    Nov 2007
    Location
    Santa Fe, New Mexico, United S
    Posts
    261

    Question TIII BOLT needed

    ANYONE know the bolt size needed for the timing belt tensioner? I would like to replace the factory one with a new one from ARP. what size do i need to order? TIA.

  2. #2
    Hybrid booster Turbo Mopar Contributor
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    385

    Re: TIII BOLT needed

    As someone who just bought a lot of ARP bolts, I want to answer this, but..... I'm guessing it's an M10 x 1.5 and I don't know about length. I did also just buy one of Cindy's rebuildable TIII tensioners, so I can measure it if someone doesn't answer by the time I get home tonight.

    Are you buying from Allen's Fasteners?

    Free bump.

  3. #3
    Hybrid booster
    Join Date
    Nov 2007
    Location
    Santa Fe, New Mexico, United S
    Posts
    261

    Re: TIII BOLT needed

    I bought one of those from cindy a couple of weeks ago as well. in the process of installing it. but the factory bolt is different on the TIII from reg 2.2 turbos its about 3/8 longer with a deep shoulder. my factory bolt has seen better days. i checked my "folgers coffee can" with no luck. im hoping someone can chime in with a part number. so i can get the right thread pitch and length. i have not heard of "allens fasteners". but ill look in to them.

    - - - Updated - - -

    JACKSON! ANY IDEA?

  4. #4
    Hybrid booster Turbo Mopar Contributor
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    385

    Re: TIII BOLT needed

    OK. Here's the info. M10 x 1.5 x 70 mm long.

    The bolt I have for the TIII tensioner is not a shoulder bolt, just a straight 15 mm hex head. The tensioner is about 56 mm thick and the bolt, when screwed in to the maximum depth of the hole leaves just over 51 mm. So, I wouldn't try to put a 75 mm bolt in there unless you wanted to use a washer.

    Here's pictures:












  5. #5
    Hybrid booster Turbo Mopar Contributor
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    385

    Re: TIII BOLT needed

    I like Allen's Fasteners because they sell ARPs in whatever quantity you need. You can buy one single bolt if you needed to. They ship flat rate, so the more you buy the better. I'd avoid selecting USPS right now though, unless you are willing to wait a month for the bolts to arrive.

    obligatory self-indulgent unrelated project pics:







    Last edited by Turbo SOB; 01-06-2021 at 10:48 PM.

  6. #6
    Hybrid booster
    Join Date
    Nov 2007
    Location
    Santa Fe, New Mexico, United S
    Posts
    261

    Re: TIII BOLT needed

    THANK YOU! you engine looks great! whats your power goal for it?

  7. #7
    Hybrid booster
    Join Date
    Nov 2007
    Location
    Santa Fe, New Mexico, United S
    Posts
    261

    Re: TIII BOLT needed

    UPDATE! I found ARP part #662-1009. perfect fit! (its a pack of five) they measure M10X1.5, 70UHL.

Similar Threads

  1. Bolt on Turbo for the TIII
    By rbrthrly900 in forum The Original "Turbo Dodge" Cars
    Replies: 0
    Last Post: 04-30-2012, 11:05 AM
  2. Engine 8 bolt crank pulley needed
    By audiomaninc in forum Parts Wanted
    Replies: 4
    Last Post: 03-12-2012, 05:05 PM
  3. Help? Bolt info needed.
    By shadow88 in forum Turbos & Intercoolers!
    Replies: 0
    Last Post: 10-21-2009, 06:54 PM
  4. bolt size needed-
    By TurboII in forum Maintenance & General Tech
    Replies: 2
    Last Post: 03-21-2009, 08:33 AM
  5. Suspension 91 and up hubs 5x100 bolt pattern needed ASAP
    By minigts in forum Parts Wanted
    Replies: 4
    Last Post: 08-09-2008, 11:33 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •