We can exchange idea and concepts to create a schematic of the SMEC logic and power boards
We can exchange idea and concepts to create a schematic of the SMEC logic and power boards
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
A good first step is to create a spreadsheet listing component name such as R280 and its value such as 104. It would also be handy to list its location in mm in an X,Y format if possible with bottom left as 0.0
For example D69 is a RA4 in a SOT-23 package it is 13mm from the left side and 48mm from the bottom. This is the diode we use to bypass for flashing.
Once we get started I will create an online spreadsheet.
Edit:
Here is the google sheet to get us started. Let me know when you are ready I can give you editor rights.
https://docs.google.com/spreadsheets...it?usp=sharing
Last edited by chromguy; 12-21-2020 at 10:04 PM.
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH