Results 1 to 13 of 13

Thread: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

  1. #1
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Date: 21st December 2020
    Username: rx2mazda
    Full Name: Carroll Roberts
    City, State, Zip: Baltimore, MD 21206
    Contact: PM here.
    Price: See Below...

    Description:

    Injector Dynamics ID1000cc injectors w/correct 60mm adapters for TD application. 5K miles since cleaning/Flow test (Flow sheet included). $330 Shipped. SOLD!

    BigStuff3 Gen3 ECU and complete wiring harness. Has RacePak module added by BigStuff. Set-up is for 4cyl/24 tooth wheel(not included)/Coil on plug ign. $750 Shipped. SOLD!

    ACT SRT-4 Lightened Flywheel and HD pressure plate w/6 puck solid hub disk(comes with 2 disk 5k and 2K miles). Fits our Large spline trans. Ran this in my A568. NO ISSUES. $270 Shipped

    AeroMotive Stealth 340 Fuel Pump. 5K Miles on it. Fits on stock sending unit. $50 Shipped.

    3 Bar Map sensors. I have 3...Two used and one new that was in my emergency kit. All work. $25 Each shipped. 2 SOLD! 1 LEFT.

    1985 GLH-T Complete wiring Harness. Body harness and engine harness and ECU. $150 Shipped SOLD!

    2 StopTech cross drilled front rotors for GLH-T. Comes with Pads $50 +shipping.SOLD!

    GLH-T Stock Radiator + Fan. Recently tested with no leaks, good fins. $45 + shipping

    GLH-T clutch brake assembly. $25 + shipping

    NOS MOPAR heater control valve for OMNI. Has metal vacuum actuator. $25 shipped.

    GLH-T Heatshield. $25 +shipping. SOLD!

    PolyBushings Front mount and Bobble strut. Strut is shortened for Turbo clearance. $30 +shipping for both. SOLD!

    Manual Boost controller. I forget the brand but it worked flawlessly. $20 shipped

    Stock TIII Forged Pistons with pins and clips. $100 Shipped. SOLD!

    WIX GLHS oil filter. $5 + shipping. SOLD!

    Pics can be seen here.............. https://photos.app.goo.gl/LhnLyJPGtc5mTBoJ6
    Last edited by rx2mazda; 01-23-2021 at 11:23 PM.

  2. #2
    Hybrid booster
    Join Date
    Mar 2013
    Location
    Wastelands of NJ
    Posts
    729

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Quote Originally Posted by rx2mazda View Post
    Date: 21st December 2020
    Username: rx2mazda
    Full Name: Carroll Roberts
    City, State, Zip: Baltimore, MD 21206
    Contact: PM here.
    Price: See Below...

    Description:

    Injector Dynamics ID1000cc injectors w/correct 60mm adapters for TD application. 5K miles since cleaning/Flow test (Flow sheet included). $330 Shipped.

    BigStuff3 Gen3 ECU and complete wiring harness. Has RacePak module added by BigStuff. Set-up is for 4cyl/24 tooth wheel(not included)/Coil on plug ign. $750 Shipped.

    ACT SRT-4 Lightened Flywheel and HD pressure plate w/6 puck solid hub disk(comes with 2 disk 5k and 2K miles). Fits our Large spline trans. Ran this in my A568. NO ISSUES. $400 Shipped

    AeroMotive Stealth 340 Fuel Pump. 5K Miles on it. Fits on stock sending unit. $75 Shipped.

    3 Bar Map sensors. I have 3...Two used and one new that was in my emergency kit. All work. $25 Each shipped. SOLD!

    1985 GLH-T Complete wiring Harness. Body harness and engine harness and ECU. $150 Shipped

    StopTech cross drilled front rotors for GLH-T. Comes with Pads $85 +shipping

    GLH-T Stock Radiator + Fan. Recently tested with no leaks, good fins. $65 + shipping

    GLH-T clutch brake assembly. $25 + shipping

    NOS MOPAR heater control valve for OMNI. Has metal vacuum actuator. $25 shipped.

    GLH-T Heatshield. $25 +shipping

    PolyBushings Front mount and Bobble strut. Strut is shortened for Turbo clearance. $30 +shipping for both. SOLD!

    Manual Boost controller. I forget the brand but it worked flawlessly. $25 shipped

    Stock TIII Forged Pistons with pins and clips. $150 Shipped.

    WIX GLHS oil filter. $5 + shipping. SOLD!

    Pics can be seen here.............. https://photos.app.goo.gl/LhnLyJPGtc5mTBoJ6
    PM sent

  3. #3
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Bump!

  4. #4
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Price drop on clutch and flywheel, fuel pump, radiator etc.

  5. #5
    boostaholic
    Join Date
    Oct 2006
    Location
    NEPA
    Posts
    1,265

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Carroll, do you have the pigtail for that last 3Bar Map?

  6. #6
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Quote Originally Posted by Simsy View Post
    Carroll, do you have the pigtail for that last 3Bar Map?

    no sorry

  7. #7
    boostaholic
    Join Date
    Oct 2006
    Location
    NEPA
    Posts
    1,265

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Quote Originally Posted by rx2mazda View Post
    no sorry
    any idea where I can buy that separate?

  8. #8
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Amazon, eBay, AutoZone. If you do a Google search for gm 3 bar map sensor pigtail.

  9. #9
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Quote Originally Posted by Simsy View Post
    any idea where I can buy that separate?
    https://www.ebay.com/itm/NEW-Chevy-G...MAAOSwMFhfpFbo

  10. #10
    Supporting Member Turbo Mopar Contributor rx2mazda's Avatar
    Join Date
    Apr 2006
    Location
    Baltimore,MD
    Posts
    2,925

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Bumpity

  11. #11
    boostaholic
    Join Date
    Oct 2006
    Location
    NEPA
    Posts
    1,265

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Is the 3 bar map a genuine GMsensor ?

  12. #12
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    Quote Originally Posted by rx2mazda View Post
    Bumpity
    Are you selling your intercooler?
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  13. #13
    Garrett booster
    Join Date
    Oct 2006
    Location
    Temecula
    Posts
    140

    Re: Part-out / Cleaning...Bigstuff3 ECU, ID injectors, wiring harnesses..etc

    PM sent

Similar Threads

  1. Electronics Wiring Harnesses
    By moparman76_69 in forum Parts For Sale
    Replies: 4
    Last Post: 02-26-2017, 06:58 PM
  2. Electronics FS: VNT and T-I Engine Wiring Harnesses
    By Directconnection in forum Parts For Sale
    Replies: 8
    Last Post: 08-31-2010, 10:58 AM
  3. interchangable wiring harnesses
    By TonaKid62 in forum Electrical & Fuel System
    Replies: 1
    Last Post: 10-08-2008, 02:59 PM
  4. FS: Wiring harnesses, SC, GLH, S60 and more stuff
    By Cliff Ramsdell in forum Parts For Sale
    Replies: 2
    Last Post: 05-27-2006, 09:26 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •