https://www.ebay.com/itm/RTX-ENVY-Wh....c100226.m3208
Will these fit a G Body without modifying the wheel wells? I know they would require hub adapters to 57.1mm. Thanks.
https://www.ebay.com/itm/RTX-ENVY-Wh....c100226.m3208
Will these fit a G Body without modifying the wheel wells? I know they would require hub adapters to 57.1mm. Thanks.
Not sure, but I like the look
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
According to CareID's website they do fit. Thinking about rolling the dice on these. https://www.carid.com/rtx-wheels/env...458893610.html
What size tire? I think the wheels should fit, but if you go too wide on the tires, you'll probably have to roll the fenders.
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
Thinking 225/45-17
Any experience with these tires?
https://tirereviewsandmore.com/achil...sport-reviews/
I tried to post an image of estimated fitment, but it didn't work.
If you go to rimsntires.com, click on the size comparer and you can put in all your specs and it will give you differences in clearance.
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
Personally, I care about weight. I would look for the lightest ones that fit your budget. These may it, but I had some that weighed way more than stock and besides the ache of pulling those things off, the added reciprocating mass affected the car.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Years ago I was all ready to purchase some 16" RFP1's with the SBC coating for my yellow Sunlight yellow Shadow and when I found out the centercaps were an additional $200 that pissed me off enough to look elsewhere. Ended up getting a smokin deal on OZ wheel pictured below.
Todd
https://www.thingiverse.com/thing:3067028
buy a 168$ anet a8 plus printer and then print your own caps in ABS. cheaper than buying the caps.
Even if you have a 3d print service print the caps, its still cheaper.
Brian
Originally Posted by turbovanman
this one too. https://www.thingiverse.com/thing:3667726
there are a bunch of them on here. https://www.thingiverse.com/search?q...&sort=relevant
you gotta look at the remixes and measure what size cap your wheel takes but its pretty easy to scale up the cap to fit any wheel in Cura.
Brian
Originally Posted by turbovanman