OK so car is an 88 T1 Lebaron with a Mopar Performance SMEC.

Car cranks but has no fuel pressure. I can't hear the pump try to prime at all, so I confirmed with a fuel pressure gauge. No pressure at all, even when cranking.

So first thing I did was jump power to the positive side of the coil, still no fuel pump noise, and no fuel pressure.

Then I got under the car and unplugged the pump to check the wiring. I've got continuity to the ground, but I never get +12 volts to the wires when I jump the positive side of the coil.

If I can't get 12 volts to the plug when jumping 12 volts to the coil, what could I be missing?

thanks,
Clay