Results 1 to 11 of 11

Thread: Need misc. parts to complete '89 TII rebuild - please help!

  1. #1
    Garrett booster
    Join Date
    Aug 2010
    Location
    Grants Pass, OR
    Posts
    225

    Need misc. parts to complete '89 TII rebuild - please help!

    Hey all,

    I've been working on rebuilding my '89 Lancer Shelby and everything's ready to go, except for a few parts that I need to finish it up.

    Front motor mount bracket - Casting# 4348327

    Forged 2.2l TII crank sprocket bolt - The mechanic I used to rebuild my short block LOST the crank sprocket bolt. I can't even describe how baffled I am at this.

    Small oil pan bolt (near water pump area) - Again, the mechanic lost the one smaller oil pan bolt that goes near where the water pump mounts.

    Turbo charge pipe/hose - A squirrel got to mine while the car was sitting

    If anybody could help me out I'd really appreciate it. Can't finish putting my baby together without these parts. The link below should bring you to a photos album with images for reference.

    https://photos.app.goo.gl/qRYTvUmKdVxWEZZu7

  2. #2
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,604

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    If you need the lower intercooler hose in your photos, I have some. $75 each plus shipping.

  3. #3
    Supporting Member II Turbo Mopar Contributor 85lebaront2's Avatar
    Join Date
    Dec 2005
    Location
    Exmore, Va. USA
    Posts
    506

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    I have a 1989 Lebaron 2.5L TI front mount, it is the updated mount assembly, matches the one I bought for my 1985 Lebaron TII conversion from Pomoco Chrysler - Plymouth in 2004 it has the same reinforcements mine has. Mine came with some special bolts that the instructions were very explicit about using. Cams, I was told when I was building my first TII setup (still have the same engine) that an NA cam will give more low end power. I may have the crank bolt, but have no way of matching it as my short block is a 1988 TII service block and is all by itself (square tooth belt and odd size 5 bolt crank pulley). If a 1989 2.5L TI is the same I have that bolt.
    "growing old is inevitable, growing up is optional"
    1986 Lebaron convertible to replace totalled 85
    1986 Ford F350 Crew Cab DRW
    1995 Lincoln Continental (project car)
    2011 Ford Flex Limited (wife's)

  4. #4
    Garrett booster
    Join Date
    Aug 2010
    Location
    Grants Pass, OR
    Posts
    225

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    Quote Originally Posted by 85lebaront2 View Post
    I have a 1989 Lebaron 2.5L TI front mount, it is the updated mount assembly, matches the one I bought for my 1985 Lebaron TII conversion from Pomoco Chrysler - Plymouth in 2004 it has the same reinforcements mine has. Mine came with some special bolts that the instructions were very explicit about using. Cams, I was told when I was building my first TII setup (still have the same engine) that an NA cam will give more low end power. I may have the crank bolt, but have no way of matching it as my short block is a 1988 TII service block and is all by itself (square tooth belt and odd size 5 bolt crank pulley). If a 1989 2.5L TI is the same I have that bolt.
    Thanks for the reply. I do have the bolts for the motor mount, it's just that the metal has cracked on mine and is no longer usable. I don't know if yours will be the same design or not, but I do have some pictures of my mount in the google photos album linked in my OP, along with the casting numbers too.

    Can anyone confirm if an '89 2.5 TI uses the same crank sprocket bolt as an '89 2.2 TII?

    - - - Updated - - -

    Quote Originally Posted by ajakeski View Post
    If you need the lower intercooler hose in your photos, I have some. $75 each plus shipping.
    Great! I'll PM you about it. Thanks!

  5. #5
    Garrett booster
    Join Date
    Aug 2010
    Location
    Grants Pass, OR
    Posts
    225

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    Bump!

    Hoping having a new comment will get more eyes on this. Still looking for motor mount bracket and crank sprocket bolt. Probably going to call Chris and Cindy here soon to see if they have any connections for these parts too.

    Appreciate anything you guys can do to help. Thanks!

  6. #6
    Supporting Member II Turbo Mopar Contributor 85lebaront2's Avatar
    Join Date
    Dec 2005
    Location
    Exmore, Va. USA
    Posts
    506

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    I will see if I can get you some pictures of the mount. Today is our anniversary so it might be a couple of days. I know it has the reinforcements and may have the PN stamped on it.
    "growing old is inevitable, growing up is optional"
    1986 Lebaron convertible to replace totalled 85
    1986 Ford F350 Crew Cab DRW
    1995 Lincoln Continental (project car)
    2011 Ford Flex Limited (wife's)

  7. #7
    Supporting Member II Turbo Mopar Contributor 85lebaront2's Avatar
    Join Date
    Dec 2005
    Location
    Exmore, Va. USA
    Posts
    506

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    Ok, here are the pictures of the front mount from the 1989 Lebaron coupe, 2.5L TI with A413.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCN4042.jpg 
Views:	119 
Size:	272.3 KB 
ID:	65024   Click image for larger version. 

Name:	DSCN4043.jpg 
Views:	122 
Size:	357.7 KB 
ID:	65025   Click image for larger version. 

Name:	DSCN4044.jpg 
Views:	119 
Size:	324.1 KB 
ID:	65026  
    "growing old is inevitable, growing up is optional"
    1986 Lebaron convertible to replace totalled 85
    1986 Ford F350 Crew Cab DRW
    1995 Lincoln Continental (project car)
    2011 Ford Flex Limited (wife's)

  8. #8
    Garrett booster
    Join Date
    Aug 2010
    Location
    Grants Pass, OR
    Posts
    225

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    Quote Originally Posted by 85lebaront2 View Post
    Ok, here are the pictures of the front mount from the 1989 Lebaron coupe, 2.5L TI with A413.
    Thank you for taking the time to do that! From what I can tell they look the same. I'm definitely interested in buying that mount off of you. How much would you want for it?

  9. #9
    Supporting Member II Turbo Mopar Contributor 85lebaront2's Avatar
    Join Date
    Dec 2005
    Location
    Exmore, Va. USA
    Posts
    506

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    Figure $35 + shipping. Damn thing is discontinued and I have no idea what the new one I put on my 2.2L TII engine cost when I bought it. It was the updated mount 4419642.
    "growing old is inevitable, growing up is optional"
    1986 Lebaron convertible to replace totalled 85
    1986 Ford F350 Crew Cab DRW
    1995 Lincoln Continental (project car)
    2011 Ford Flex Limited (wife's)

  10. #10
    Garrett booster
    Join Date
    Aug 2010
    Location
    Grants Pass, OR
    Posts
    225

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    Quote Originally Posted by 85lebaront2 View Post
    Figure $35 + shipping. Damn thing is discontinued and I have no idea what the new one I put on my 2.2L TII engine cost when I bought it. It was the updated mount 4419642.
    And I figure you got yourself a deal. Really appreciate it! This means the only thing I need now is a crank bolt and I have everything to put good'ol Jango back together.

    I'll PM you with my info so we can make the exchange.

  11. #11
    Supporting Member II Turbo Mopar Contributor 85lebaront2's Avatar
    Join Date
    Dec 2005
    Location
    Exmore, Va. USA
    Posts
    506

    Re: Need misc. parts to complete '89 TII rebuild - please help!

    I might have a crank bolt, if it is the same as the normal common block one.
    "growing old is inevitable, growing up is optional"
    1986 Lebaron convertible to replace totalled 85
    1986 Ford F350 Crew Cab DRW
    1995 Lincoln Continental (project car)
    2011 Ford Flex Limited (wife's)

Similar Threads

  1. General Misc Parts, A body, Turbo Parts cheap, shipping included
    By 90TSpirit in forum Parts For Sale
    Replies: 6
    Last Post: 11-30-2011, 09:28 AM
  2. Replies: 23
    Last Post: 03-15-2010, 02:16 PM
  3. Replies: 10
    Last Post: 01-25-2008, 07:18 PM
  4. Rebuild Complete
    By iniviate in forum 16v Factory Engines
    Replies: 21
    Last Post: 08-20-2006, 09:13 PM
  5. Gasket Set for a complete rebuild.
    By 85_600 in forum Maintenance & General Tech
    Replies: 7
    Last Post: 01-24-2006, 05:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •