Page 2 of 2 FirstFirst 12
Results 21 to 24 of 24

Thread: turn signals not working

  1. #21

    Re: turn signals not working

    Quote Originally Posted by mrchuck View Post
    It`s a 2 pin vss, I tested the continuity on Circuit C7, VSS WT/OR Wire to Instrument Cluster WT/OR Wire located at the Instrument Cluster R/S 14 Pin Connector Cavity 5 and i have continuity. Then i tested cavity 5 to top terminal of the disconnected speedo connector and i have continuity.Then i disconnected the speedometer connector at the rear/center of the cluster circuit board, the two 14 pin cluster connectors stay plugged in and with the key on probe the ignition and ground terminals of the speedometer connector, and i got battery voltage, I think the speedo is bad ,but the gears that i speak of are from the inside of the speedo not on the sensor. I do have continuity & battery voltage to the 3 pin connector on the speedo. I have this posted to Turbo Dodge too and i was getting help from NAJ overthere.

    https://www.turbododge.com/threads/turn-signals-not-working.1256080/#post-4523340

    -
    Maybe I am missing it, but what I don't see is you checking for zero ohm pulses on the Speed/Distance sensor itself...

  2. #22
    Garrett booster
    Join Date
    Dec 2016
    Location
    greenville,pa
    Posts
    68

    Re: turn signals not working

    Fixed , Bought a new Vss and gear for the Vss put the speedo in from the 94 lebaron works great now

  3. #23
    Garrett booster
    Join Date
    Dec 2016
    Location
    greenville,pa
    Posts
    68

    Re: turn signals not working

    Quote Originally Posted by c2xejk View Post
    Maybe I am missing it, but what I don't see is you checking for zero ohm pulses on the Speed/Distance sensor itself...

    I was just following what NAJ was telling me to try on the Dodge Turbo forms :
    https://www.turbododge.com/threads/t...2#post-4523380

  4. #24
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: turn signals not working

    Quote Originally Posted by mrchuck View Post
    fixed , bought a new vss and gear for the vss put the speedo in from the 94 lebaron works great now
    fantastic!!!!
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Turn signals not working
    By 88C/S in forum "I need help!"
    Replies: 6
    Last Post: 01-16-2016, 10:55 PM
  2. no turn signals
    By 89daytonacs in forum "I need help!"
    Replies: 10
    Last Post: 01-27-2010, 02:48 AM
  3. Turn signals stopped working, only function for a second.
    By SteveReject in forum "I need help!"
    Replies: 13
    Last Post: 04-23-2007, 10:23 AM
  4. no turn signals, no hazzards.
    By t3rse in forum "I need help!"
    Replies: 3
    Last Post: 03-23-2006, 10:00 PM
  5. 91 Daytona turn signals
    By jckrieger in forum "I need help!"
    Replies: 15
    Last Post: 03-06-2006, 06:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •