Results 1 to 10 of 10

Thread: Sbec t1 MPTune/Scan questions

  1. #1
    Mitsu booster
    Join Date
    Oct 2018
    Location
    Fort Wayne
    Posts
    32

    Sbec t1 MPTune/Scan questions

    Trying to learn this suite, and it's giving me issues. Any tips for a beginner? Trying to download this tune so I can have it as a backup if anything happens/so I can log. It looks like I have to have a current tune on file to compare to and use mpscan?


    Setup:
    90 van
    2.5 t1
    A555
    Super70
    3" sv
    3" exhaust with vibrant 3" mid muffler
    3 bar map
    Walbro 255
    +40's
    Big fmic
    Ac deleted
    2.5" piping
    Catch can with -8 hoses

    Missing some things but I'll edit and update when I think of them.

    Sent from my SM-G965U using Tapatalk

  2. #2
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,838

    Re: Sbec t1 MPTune/Scan questions

    you have a flashable SBEC installed?

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  3. #3
    Mitsu booster
    Join Date
    Oct 2018
    Location
    Fort Wayne
    Posts
    32

    Re: Sbec t1 MPTune/Scan questions

    Yes I do.

    Sent from my SM-G965U using Tapatalk

  4. #4
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,838

    Re: Sbec t1 MPTune/Scan questions

    and this is where my experience with flashable SBEC's end lol. wayne? miles? morris?

    though i dont like it (lol) there is a facebook group that supports the MPScilink stuff and may be faster access to help.

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  5. #5
    Mitsu booster
    Join Date
    Oct 2018
    Location
    Fort Wayne
    Posts
    32

    Re: Sbec t1 MPTune/Scan questions

    Miles just added me to that group, but I thank you for at least attempting!

    Sent from my SM-G965U using Tapatalk

  6. #6
    Garrett booster Turbo Mopar Contributor
    Join Date
    Oct 2010
    Location
    Massachusetts
    Posts
    221

    Re: Sbec t1 MPTune/Scan questions

    First question I would ask is if you have been able to successfully log through MPScan?

    Second, do you have the proper BoostButton type FTDI cable that has the components for protection and the boot wire? (They are required for SBEC)

  7. #7
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: Sbec t1 MPTune/Scan questions

    Quote Originally Posted by Dan H View Post
    First question I would ask is if you have been able to successfully log through MPScan?

    Second, do you have the proper BoostButton type FTDI cable that has the components for protection and the boot wire? (They are required for SBEC)
    He recently purchased a pretested cable and has an SBEC with BB flashable module on route.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  8. #8
    Garrett booster Turbo Mopar Contributor
    Join Date
    Oct 2010
    Location
    Massachusetts
    Posts
    221

    Re: Sbec t1 MPTune/Scan questions

    Nice, then if he is doing the 12v signal to the boot wire at the right time, there might be something else off in his MPTUNE port settings.

    Or maybe the drivers didn't install.

    I've had my port settings off without realizing it.
    I'm away from my computer to double check them to post.

  9. #9
    Mitsu booster
    Join Date
    Oct 2018
    Location
    Fort Wayne
    Posts
    32

    Re: Sbec t1 MPTune/Scan questions

    I was able to pull the cal in a .bin file from the chip. But I haven't figured out MPScan yet.

    Sent from my SM-G965U using Tapatalk

  10. #10
    Mitsu booster
    Join Date
    Oct 2018
    Location
    Fort Wayne
    Posts
    32

    Re: Sbec t1 MPTune/Scan questions

    Quote Originally Posted by Dan H View Post
    Nice, then if he is doing the 12v signal to the boot wire at the right time, there might be something else off in his MPTUNE port settings.

    Or maybe the drivers didn't install.

    I've had my port settings off without realizing it.
    I'm away from my computer to double check them to post.
    I'm on com5 for the port (and I check it every time I open MPTune), have the ecu settings changed to SBEC t1, etc.

    Sent from my SM-G965U using Tapatalk

Similar Threads

  1. MPTune issue, using flashable SBEC
    By Dan H in forum EFI Tuning
    Replies: 26
    Last Post: 06-22-2018, 11:33 AM
  2. Can't install MPTune or Scan on New Computer
    By enduro74 in forum EFI Tuning
    Replies: 5
    Last Post: 08-19-2017, 12:42 PM
  3. MPTune questions
    By jeff1234 in forum Electrical & Fuel System
    Replies: 2
    Last Post: 08-12-2017, 04:57 PM
  4. otc scan tool questions
    By glht_omni in forum EFI Tuning
    Replies: 15
    Last Post: 07-15-2008, 06:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •