Used to have a Lancer Pacifica or just the same problem ?
Soooo I think I figured out what I'm going to do myself anyway...
I'm picking up some flapper sanding disks for my angle grinder today and I'm going to hit it with that. Much less aggressive than the wire wheel I was thinking of using and should take it to bare metal. After angle grinder sanding I'll hit it with my DA sander with 80grit again, then I'm going to apply some Loctite Brand Naval Jelly rust remover. Wash that off, wipe down with mineral spirits, Bondo 2 little spots on the roof, DA the whole roof with 80,150, 200. Prime with self etching primer(3 coats ? Maybe more), hand wet sand with 400,800,1000. Top coat with either the original white custom made at a local place the makes thier own spray cans, wet sand that, then some high quality clear coat from the same place, then wet sand and it should be 💯
Get prepared for the Christmas with gift sales from catalogues like
Myer Catalogue.
Thoughs and advice still appreciated !