Was so excited about the intake clearing
And I mounted up the header I got from Anthony (custom DCR piece he had made for the Colt). Looked great on there ! Slight warp on the flange and looks like some cracks on the tubes that'll need to be addressed.

Slapped on the turbo
Everything fits , everything clears
Even my Tial wastegate
No fender trimming needed, even clears the P/S bracket and reservoir (probably getting removed)

Crap the starter !!
Tested the other block up to the trans
The one tube hits along a good portion of the starter
Started spacing it out, figured I could double up a flange. Over 3/8" and it's still touching.
Swapped the 3 different style starters
All no luck , working on another trick up my sleeve shortly.

Sent from my SM-N960U using Tapatalk