Has anyone ever flashed a turbo cal to a tbi SMEC logic board, but run a turbo SMEC power board? Also, has anyone used a V6 SMEC for a turbo cal?
Has anyone ever flashed a turbo cal to a tbi SMEC logic board, but run a turbo SMEC power board? Also, has anyone used a V6 SMEC for a turbo cal?
I've never heard of the former, but people on the board are currently working on using the V6 SBECs for 4cyl turbo applications.
Last edited by cordes; 11-29-2019 at 04:14 PM.
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
i know the TBI and turbo LM's are different with the TBI boards missing components. I think i have both laying around still.
Brian
Originally Posted by turbovanman
i know the TBI and turbo LM's are different with the TBI boards missing components. I think i have both laying around still.
Brian
Originally Posted by turbovanman
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
Currently have an 89_25_T1_ATX board with all the potting removed or close and an 89_25_tbi_ATX board with just the potting around the eprom removed. Both chips have been pulled and currently going back and forth between the un-potted turbo logic board and the basically see through tbi logic board. When I say logic board, I mean the back board of a SMEC. It would be nice to know what's been done to convert LOGIC MODULES (LM) from tbi to turbo and also if anyone knows what has been done with what Rob Lloyd mentioned as the "super LM" using the SMEC processor. Also, currently found that in the bulkhead outputs, tbi shows a shift light indicator. Has anyone implemented the shift light to SMEC or turbonator SMEC codebase? Lastly, it would appear that a tbi and V6 SMEC power board could be used to be make 2 turbo SMEC power boards.