Results 1 to 6 of 6

Thread: MPtune calculated tables

  1. #1
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,010

    MPtune calculated tables

    Hello all, I have never understood the tables. Mptune/calculated tables/full throttle total timing/rpm vs psi chart. In the upper right hand corner is a blacked out box with teal letters that says...X:27.817 (in/Hg) Y: 19.325 (degrees). What do these numbers represent beyond the obvious nomenclature? Are these numbers related in some way to the PSI vs RPM charts.
    Additionally If I pick out any X-Y juncture, what does the number displayed in the box represent, timing, corrections to timing or some other function.

    Is there a resource that explains these things?

    If you can help, thanks!
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  2. #2
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPtune calculated tables

    purely a bug! the box in the upper right is just left there from the last 2d table you were looking at. when you click on the 3d table i should really hide that box since it does not apply.

    in the 3d table each box in the grid represents the total timing.
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  3. #3
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,010

    Re: MPtune calculated tables

    Does that total timing number actually happen or is it a hypothetical number that may be reached under certain conditions?
    Thanks Wowzer
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  4. #4
    Supporting Member Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    2,038

    Re: MPtune calculated tables

    that table basically shows what is commanded/calculated based on the timing tables and the min/max limits from additional tables. so, based on rpm and manifold pressure that is what the ecu is wanting for timing.
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  5. #5
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,010

    Re: MPtune calculated tables

    Thanks!
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  6. #6
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,010

    Re: MPtune calculated tables

    Wowzer how do I determine whether the negative 14 degrees I have set at 5000 rpm and 18 psi on my advance from map warm full graph line point actually is plus 3 degrees.
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

Similar Threads

  1. MPTune on line tables
    By harley04 in forum EFI Tuning
    Replies: 2
    Last Post: 11-13-2016, 12:38 AM
  2. Replies: 7
    Last Post: 11-06-2016, 11:28 AM
  3. What does delta mean in the various tables?
    By Force Fed Mopar in forum EFI Tuning
    Replies: 8
    Last Post: 08-27-2011, 08:34 AM
  4. 0078 SL timing tables vs 171/641 timing tables
    By Force Fed Mopar in forum EFI Tuning
    Replies: 5
    Last Post: 07-20-2011, 10:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •