Hello all,
I need ideas as my DD has a cut that was caused by the rad fan in the lower Rad hose. I don't have a spare 87 but i do have a used common block hose that may work.
so here are my idea.
After removing cleaning and drying hose
1)fill small gap 1/16" x 1" with Qbond , cover with adhesive coated piece of rubber tubing( like a patch). Wrap with three hose clamps.

I could replace Qbond with RTV but I want to drive the car to work tomorrow. The gap could also be repaired with E6000 but slow to harden
Thanks!