Which cable is correct for my 89 CSX? I accidentally ripped the original one apart. I see a few options on Rockauto or Amazon, but none of them look like the top half which I need. Some of them don't look like they would even hook up to the cluster.
Which cable is correct for my 89 CSX? I accidentally ripped the original one apart. I see a few options on Rockauto or Amazon, but none of them look like the top half which I need. Some of them don't look like they would even hook up to the cluster.
Cable is a two part deal on all the 88 and 89 units ive owned. has a union at the center.
1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!
Same here. That's why I'm not sure which unit to get.
Well shucks, thought thats why it looked different. if you cant find one I should have one or two around.
1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!
Does anyone know which is the correct length for an 89 Shadow? This is one of the few pieces I need to have the car back on the road, even if in ugly cosmetic condition.
Hi Brian,
I replaced the two piece on my 87 Sundance with one recommended by RA. I was a wee bit long but worked.
If you wish I can measure my spare one ATP Y829
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
Since my CSX is now SBEC, I am planning to switch to electronic speedo
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
Yeah, I should probably do that myself since I have spare clusters etc. and the car is an 89 CSX. At the same time, it has been very difficult to let go of the originality of #42 after the fire. It's getting better for sure, but I still have some way to go. Maybe the next time it breaks...
i bought one of those cables as my reliant's cable is damaged at the speedo end.... the replacement cable arrived damaged... the clip at the speedo end was broken off... rock auto is sending a replacement.
Originally Posted by turbovanman
i got my replacement.
my factory one is pretty hammered at the speedo connection. right now its being held together with electrical tape and a bunch of small zip ties.
Brian
Originally Posted by turbovanman