Anyone with information on the colour code of the plastic clip that is used to push the MOSFET drivers in contact with the heatsink. I have seen Red, Green, Yellow, Black, Gray, Blue, Orange, White(natural). etc.
I am unsure if this was to identify the populated board itself or a colour code was used to identify the drivers under that particular heat sink.
updated
SBEC2
Turbo- left to right Gray marked 1002, Blue marked 1003
V6- left to right Orange marked 1006, Yellow marked 1005 and Green marked 1004
For example, 92 2.5 T1 SBEC2 part number 471-4122. The colour coded clips that hold in the main MOSFET drivers, Light blue on the left, medium blue on the right
SBEC2
SBEC
EFI ---Natural 3549, Black 3548
Turbo Red 6541, Natural 6540 and Black 6548