Results 1 to 5 of 5

Thread: Colour code for SBEC2 driver alignment assemblies

  1. #1
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Colour code for SBEC2 driver alignment assemblies

    Anyone with information on the colour code of the plastic clip that is used to push the MOSFET drivers in contact with the heatsink. I have seen Red, Green, Yellow, Black, Gray, Blue, Orange, White(natural). etc.
    I am unsure if this was to identify the populated board itself or a colour code was used to identify the drivers under that particular heat sink.

    updated

    SBEC2
    Turbo- left to right Gray marked 1002, Blue marked 1003
    V6- left to right Orange marked 1006, Yellow marked 1005 and Green marked 1004

    For example, 92 2.5 T1 SBEC2 part number 471-4122. The colour coded clips that hold in the main MOSFET drivers, Light blue on the left, medium blue on the right
    SBEC2

    SBEC
    EFI ---Natural 3549, Black 3548
    Turbo Red 6541, Natural 6540 and Black 6548
    Last edited by chromguy; 07-27-2019 at 10:02 PM.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,438

    Re: Colour code for SBEC2 driver alignment assemblies

    I don't know, but I do have an NOS SBEC of some vintage for a V6 car in the basement if you want me to look at anything on it.

  3. #3
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: Colour code for SBEC2 driver alignment assemblies

    Thanks Brian,
    I will write up with picture what I need over the next day or so
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  4. #4
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: Colour code for SBEC2 driver alignment assemblies

    Quote Originally Posted by chromguy View Post
    I am unsure if this was to identify the populated board itself or a colour code was used to identify the drivers under that particular heat sink.
    Interesting that I just found a SBEC2 with the same combo as the Turbo but without several of the MOSFET drivers installed.
    Rats, now things are more complex, what a shocker!!!
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  5. #5
    Hybrid booster Turbo Mopar Contributor 85lebaront2's Avatar
    Join Date
    Dec 2005
    Location
    Exmore, Va. USA
    Posts
    513

    Re: Colour code for SBEC2 driver alignment assemblies

    Maybe the colour was a shift or line identifier more than electronics identifier?

Similar Threads

  1. 1990 SBEC 2.5 Turbo, Code 27 #2 injector driver?
    By Tim in forum Maintenance & General Tech
    Replies: 4
    Last Post: 02-27-2013, 11:19 PM
  2. code 26-injector driver issue...
    By tsiconquest88 in forum "I need help!"
    Replies: 12
    Last Post: 07-27-2009, 01:57 PM
  3. any one know how to get colour code
    By turzbo in forum Interior & Exterior Restoration
    Replies: 7
    Last Post: 03-05-2009, 03:12 PM
  4. Paint colour?
    By WOP'R in forum Interior, Exterior and Chassis Modifications
    Replies: 4
    Last Post: 08-30-2006, 11:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •