Looking for a non common block with stock bore.
Need to rebuild my recent engine as the machine shop jacked up the bore.
Im in colorado springs so the closer the better unless shipping might be an option.
Looking for a non common block with stock bore.
Need to rebuild my recent engine as the machine shop jacked up the bore.
Im in colorado springs so the closer the better unless shipping might be an option.
Last edited by going4speed; 09-08-2019 at 10:12 PM.
Bummer, I just sent an '88 block and crank to the scrap yard.
that does suck
I can take a look in my stash. Are you only looking for a bare block with it’s main caps?
Bare block with caps would be perfect.
Sounds good. I have a good used block that was originally out of a '87 Shelby Lancer. It started to have a little rod bearing noise so it was removed. Bores should be stock size and fine. I do need to finish stripping it down though.
going4speed - looks like your PM box is full.
I'll get the block torn down this weekend. I *might* be able to help with delivery but need to get my schedule nailed down for school/work next week. I have a pretty massive stash of 2.2/2.5 stuff, so let me know if there is anything else you might want or need.
Fixed the inbox issue.
I'll give it a think on if I need anything else. With two TD's that has to be true.
Still looking for a block in Colorado or close to it if anyone has one. Non common stock bore.