Results 1 to 11 of 11

Thread: Non-common block wanted

  1. #1
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,241

    Still looking: Non-common block wanted

    Looking for a non common block with stock bore.

    Need to rebuild my recent engine as the machine shop jacked up the bore.

    Im in colorado springs so the closer the better unless shipping might be an option.
    Last edited by going4speed; 09-08-2019 at 10:12 PM.

  2. #2
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    4,954

    Re: Non-common block wanted

    Bummer, I just sent an '88 block and crank to the scrap yard.

  3. #3
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,241

    Re: Non-common block wanted

    that does suck

  4. #4
    Supporting Member Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,352

    Re: Non-common block wanted

    I can take a look in my stash. Are you only looking for a bare block with itís main caps?
    87 Shelby Lancer #127
    91 Dodge Spirit R/T
    08 Dodge Caliber SRT-4
    86 Dodge Omni GLH Turbo

  5. #5
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,241

    Re: Non-common block wanted

    Bare block with caps would be perfect.

  6. #6
    Supporting Member Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,352

    Re: Non-common block wanted

    Sounds good. I have a good used block that was originally out of a '87 Shelby Lancer. It started to have a little rod bearing noise so it was removed. Bores should be stock size and fine. I do need to finish stripping it down though.
    87 Shelby Lancer #127
    91 Dodge Spirit R/T
    08 Dodge Caliber SRT-4
    86 Dodge Omni GLH Turbo

  7. #7
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,241

    Re: Non-common block wanted

    Fair enough. Let me know.

    Quote Originally Posted by iTurbo View Post
    Sounds good. I have a good used block that was originally out of a '87 Shelby Lancer. It started to have a little rod bearing noise so it was removed. Bores should be stock size and fine. I do need to finish stripping it down though.

  8. #8
    Supporting Member Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,352

    Re: Non-common block wanted

    going4speed - looks like your PM box is full.

    I'll get the block torn down this weekend. I *might* be able to help with delivery but need to get my schedule nailed down for school/work next week. I have a pretty massive stash of 2.2/2.5 stuff, so let me know if there is anything else you might want or need.
    87 Shelby Lancer #127
    91 Dodge Spirit R/T
    08 Dodge Caliber SRT-4
    86 Dodge Omni GLH Turbo

  9. #9
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,241

    Re: Non-common block wanted

    Fixed the inbox issue.

    I'll give it a think on if I need anything else. With two TD's that has to be true.

  10. #10
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,241

    Re: Non-common block wanted

    Did you manage to tear down the motor? Does the block look good?

    Quote Originally Posted by iTurbo View Post
    going4speed - looks like your PM box is full.

    I'll get the block torn down this weekend. I *might* be able to help with delivery but need to get my schedule nailed down for school/work next week. I have a pretty massive stash of 2.2/2.5 stuff, so let me know if there is anything else you might want or need.

  11. #11
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,241

    Re: Non-common block wanted

    Still looking for a block in Colorado or close to it if anyone has one. Non common stock bore.

Similar Threads

  1. Engine wanted common block
    By Warren Stramer in forum Parts Wanted
    Replies: 21
    Last Post: 08-29-2012, 07:20 PM
  2. Engine Wanted: 89 Common block crank pulley.
    By 89ShelbyGuy in forum Parts Wanted
    Replies: 1
    Last Post: 05-11-2012, 04:38 PM
  3. Engine non-common block oil pan wanted
    By nschultz0124 in forum Parts Wanted
    Replies: 4
    Last Post: 08-25-2011, 05:02 PM
  4. Engine WANTED: 89 2.2 Turbo common block
    By mikes87t2 in forum Parts Wanted
    Replies: 0
    Last Post: 01-27-2009, 10:33 PM
  5. Wanted 1989 2.5 common short block
    By BoostedL in forum Parts Wanted
    Replies: 4
    Last Post: 10-31-2006, 11:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •