Results 1 to 4 of 4

Thread: Brake hard line WITH spring guard

  1. #1
    turbo addict Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,384

    Brake hard line WITH spring guard

    Hey guys, I am redoing all the brake hard lines on my Omni GLH Turbo and I found that you can get 3/16" brake line at NAPA that has the spring guard just like the factory lines. They come in straight, prefabricated sections with the tube nuts and flare already done.

    The longest section available is 60" (I think the come in 8", 12", 20", 30", 40", 51" and 60"), so the longer runs do require the use of a double flare union.

    Here are some pictures of the longest section on my Omni that runs from the prop valve to the rear passenger side trailing arm. I used some mason string line and zip tied it to the original hard line to determine length (151" total) and then used two 60" and one 30" section along with two unions to make it.

    It bends up easily, and the spring guard practically eliminates any chance of kinking. I was going to buy the NiCop hard tube from NAPA, until I saw that they sell the spring guard stuff so I'm glad I went this route instead. The new line is zip tied to the original in the photos to aid in bending it up just like the factory one.

    Click image for larger version. 

Name:	IMG_0163_Fotor.jpg 
Views:	124 
Size:	392.5 KB 
ID:	64212Click image for larger version. 

Name:	IMG_0164_Fotor.jpg 
Views:	136 
Size:	469.0 KB 
ID:	64213Click image for larger version. 

Name:	IMG_0166_Fotor.jpg 
Views:	128 
Size:	526.4 KB 
ID:	64214

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Brake hard line WITH spring guard

    That's pretty cool. I've been ordering from the Right Stuff for the pieces which are prebent for our cars. How much does this stuff cost?

  3. #3
    turbo addict Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Location
    Gillette, Wyoming
    Posts
    5,384

    Re: Brake hard line WITH spring guard

    So far I've bought 60" and 30" sections. The 60" sections (BK 813-1193) are $10.09 and the 30" sections (BK 813-1190) are 6.99 each. The unions are
    are $3.05 a piece.

    So far I've done the two longest runs. The prop valve to rear passenger side of the trailing arm (~151" total) was about $33 to make (60" + 60" + 30" + 2 unions) and the prop valve to driver side of trailing arm (~118" total) was about $23 to make (60" + 60" + 1 union).

  4. #4
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Brake hard line WITH spring guard

    Well, that is significantly less expensive than the SS kit I purchased a couple months ago. It was about $100 shipped for the complete front kit.

Similar Threads

  1. Cross-over hard brake line the same in all K-based cars?
    By fleckster in forum Suspension, Brakes, Wheels, Traction
    Replies: 8
    Last Post: 06-13-2019, 06:04 PM
  2. Replies: 5
    Last Post: 05-10-2019, 06:00 PM
  3. Replacement hard brake line
    By Ashyukun in forum Suspension, Brakes, Wheels, Traction
    Replies: 8
    Last Post: 10-12-2018, 05:13 PM
  4. General WTB: brake hard line for Omni
    By iTurbo in forum Parts Wanted
    Replies: 0
    Last Post: 12-02-2017, 05:02 PM
  5. AN to factory hard line
    By iTurbo in forum Electrical & Fuel System
    Replies: 29
    Last Post: 08-29-2008, 10:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •