If you're parting a true T2 car please post in this thread. I need the pieces on the end of the main brace piece in the middle


These only came on true T2 5spd cars.

So ShelbyZ's, Lancer Shelby's, Lebaron GTS. Lebaron GTC.

I have the center C-Channel piece. I need a set of the side brackets. They're at the ends of the lower rad support tucked into it. They're towards the passenger cabin from the C-Channel piece which is bolted to the front of the lower rad support. The end bolts in the C-channel bolt through the lower rad support and into clips that attach to these brackets. Then 2 other bolts hold the brackets to the body of the car. The splash shield ends in the fender wells cover them slightly.

I need a set of brackets and bolts.