Results 1 to 10 of 10

Thread: Needing an IMSA 44mm Intake Valve for G Head

  1. #1
    Garrett booster
    Join Date
    Dec 2007
    Location
    Edmonton, AB
    Posts
    80

    Needing an IMSA 44mm Intake Valve for G Head

    Needing an IMSA 44mm Intake Valve for G Head
    I am in need of 1 intake valve. 44mm by 112mm length. Let me know what you have. I will buy a set of 4 if you have.

    Thanks

  2. #2
    Supporting Member Turbo Mopar Contributor GLHS60's Avatar
    Join Date
    Dec 2005
    Location
    Sherwood Park Alberta, Canada
    Posts
    1,283

    Re: Needing an IMSA 44mm Intake Valve for G Head

    I believe I have a gently used set.

    If interested PM your phone #

    Thanks
    Randy


    Quote Originally Posted by 69viper View Post
    Needing an IMSA 44mm Intake Valve for G Head
    I am in need of 1 intake valve. 44mm by 112mm length. Let me know what you have. I will buy a set of 4 if you have.

    Thanks


    Randy Hicks
    86 GLHS60
    86 GLHS 373 : SOLD, but never forgotten
    89 Turbo Minivan
    83 Turbo Rampage : SOLD
    Edmonton,Alberta,Canada

  3. #3
    Supporting Member II Turbo Mopar Contributor Dr. Johny Dodge's Avatar
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    1,238

    Re: Needing an IMSA 44mm Intake Valve for G Head

    if it helps I'd be willing to split on that with you .. spares sound like a good idea and if you're going to use one for a repair then the set becomes three spares .. save one , pedal two (?)

    just puttin' it out there .

  4. #4
    Supporting Member Turbo Mopar Contributor GLHS60's Avatar
    Join Date
    Dec 2005
    Location
    Sherwood Park Alberta, Canada
    Posts
    1,283

    Re: Needing an IMSA 44mm Intake Valve for G Head

    I loaned him a valve so he can get his Engine back together so he's still looking.

    Thanks
    Randy


    Randy Hicks
    86 GLHS60
    86 GLHS 373 : SOLD, but never forgotten
    89 Turbo Minivan
    83 Turbo Rampage : SOLD
    Edmonton,Alberta,Canada

  5. #5
    Supporting Member II Turbo Mopar Contributor Dr. Johny Dodge's Avatar
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    1,238

    Re: Needing an IMSA 44mm Intake Valve for G Head

    alrighty..

    offer stands , I have a home for one or two spares if they need one someday ..

  6. #6
    Supporting Member Turbo Mopar Contributor GLHS60's Avatar
    Join Date
    Dec 2005
    Location
    Sherwood Park Alberta, Canada
    Posts
    1,283

    Re: Needing an IMSA 44mm Intake Valve for G Head

    Hopefully he finds a set and we can split it up.

    Thanks
    Randy


    Randy Hicks
    86 GLHS60
    86 GLHS 373 : SOLD, but never forgotten
    89 Turbo Minivan
    83 Turbo Rampage : SOLD
    Edmonton,Alberta,Canada

  7. #7
    turbo addict
    Join Date
    Dec 2006
    Location
    MPLS, MN
    Posts
    3,252

    Re: Needing an IMSA 44mm Intake Valve for G Head

    I have a set of Mopar BV g-head valves that were never run but were assembled in a head. Machinist goofed up the seats in head, so head was scrapped. Valve tips on two of the valves were dressed a bit. One has .006 removed while the other has .011 removed. Two are untouched. One of you guys LMK if you are interested. Been sitting in a box for 25 years or so...
    BTW I also have the matching BV G-head exhaust valves too. MP P4529443. Same deal. Unused but some tips heights have been altered a bit.
    Todd

  8. #8
    Garrett booster
    Join Date
    Feb 2015
    Location
    United States
    Posts
    158

    Re: Needing an IMSA 44mm Intake Valve for G Head

    I have a set of new IMSA valves, can't remember if they're for swirl head or G-head though. Part numbers are P4286793 for intake and P4286794 for exhaust.

  9. #9
    Garrett booster
    Join Date
    Dec 2007
    Location
    Edmonton, AB
    Posts
    80

    Re: Needing an IMSA 44mm Intake Valve for G Head

    Quote Originally Posted by 19luis8510 View Post
    I have a set of new IMSA valves, can't remember if they're for swirl head or G-head though. Part numbers are P4286793 for intake and P4286794 for exhaust.
    I believe those are for the swirl head.

  10. #10
    Garrett booster
    Join Date
    Dec 2007
    Location
    Edmonton, AB
    Posts
    80

    Re: Needing an IMSA 44mm Intake Valve for G Head

    Quote Originally Posted by 4 l-bodies View Post
    I have a set of Mopar BV g-head valves that were never run but were assembled in a head. Machinist goofed up the seats in head, so head was scrapped. Valve tips on two of the valves were dressed a bit. One has .006 removed while the other has .011 removed. Two are untouched. One of you guys LMK if you are interested. Been sitting in a box for 25 years or so...
    BTW I also have the matching BV G-head exhaust valves too. MP P4529443. Same deal. Unused but some tips heights have been altered a bit.
    Todd
    PM Sent

Similar Threads

  1. Engine WTB- 44mm intake valves
    By moparzrule in forum Parts Wanted
    Replies: 4
    Last Post: 01-05-2017, 08:06 PM
  2. Engine WTB- 44mm intake valves for G head and oversize seats
    By moparzrule in forum Parts Wanted
    Replies: 6
    Last Post: 09-28-2015, 04:51 PM
  3. Engine For Sale! T2 Compressor, 44mm Intake Valves, R/T I/C, etc.
    By ShelGame in forum Parts For Sale
    Replies: 19
    Last Post: 03-26-2010, 10:28 AM
  4. Engine 58mm TB w/ sensors, 44mm Intake valves
    By Force Fed Mopar in forum Parts For Sale
    Replies: 12
    Last Post: 09-08-2009, 06:06 PM
  5. IMSA Head
    By Mario in forum Engine - Block, Piston, Heads, Intakes
    Replies: 44
    Last Post: 12-25-2006, 03:46 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •