Results 1 to 12 of 12

Thread: Is EFI injector high or Low impedance?

  1. #1
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Is EFI injector high or Low impedance?

    I checked the FSD but did not find the impedance.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,438

    Re: Is EFI injector high or Low impedance?

    You mean our stock injectors? They're low impedance.

  3. #3
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: Is EFI injector high or Low impedance?

    Quote Originally Posted by cordes View Post
    You mean our stock injectors? They're low impedance.
    Thanks Brian for your reply,
    I am pseudo reverse engineering the functionality of the SBEC2
    I agree that the Turbo injectors are generally low impedance except for a few high versions in the very early 80's.
    The V6 injectors appear to be high impedance and indeed use different circuitry at the injector driver.
    I am looking at the EFI injector to better understand the driver circuitry thus my desire to determine if the EFI injector is high or low impedance.
    Too bad I threw out three EFI injectors during my fall cleanup.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  4. #4
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,438

    Re: Is EFI injector high or Low impedance?

    Which injectors, specifically, are you wanting to test?

  5. #5
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: Is EFI injector high or Low impedance?

    I am looking for the impedance of the EFI injector, the one located in the TB of the non turbo units
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  6. #6
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,438

    Re: Is EFI injector high or Low impedance?

    Quote Originally Posted by chromguy View Post
    I am looking for the impedance of the EFI injector, the one located in the TB of the non turbo units
    Thanks. I thought you were going after a TBI injector, but I wasn't sure. Unfortunately, I too have thrown out or given away all of my Carb/TBI stuff. If I get to the yard before you get this done, I'll certainly pull one for you.

  7. #7
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: Is EFI injector high or Low impedance?

    Thanks Brian,
    I will be visiting a friend over the next few weeks with a 2.5 EFI so I may check at that point
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  8. #8
    Hybrid booster
    Join Date
    Oct 2015
    Location
    Jacksonville
    Posts
    411

    Re: Is EFI injector high or Low impedance?

    If you can find someone with the part number for the injector there are sites that i can use to find the impedance.

  9. #9
    Hybrid booster Turbo Mopar Contributor 85lebaront2's Avatar
    Join Date
    Dec 2005
    Location
    Exmore, Va. USA
    Posts
    513

    Re: Is EFI injector high or Low impedance?

    I downloaded a complete list, unfortunately a lot of the Chrysler ones have incomplete information. It includes all makes. It is Stan Weiss' electronic fuel injector flow data table.

  10. #10
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: Is EFI injector high or Low impedance?

    Quote Originally Posted by masterjr33 View Post
    If you can find someone with the part number for the injector there are sites that i can use to find the impedance.
    OK I will give it a go as I believe I should be able to find the part number. I checked 4554101 TBI but could not find impedance value, I will have a better look later

    - - - Updated - - -

    Quote Originally Posted by 85lebaront2 View Post
    I downloaded a complete list, unfortunately a lot of the Chrysler ones have incomplete information. It includes all makes. It is Stan Weiss' electronic fuel injector flow data table.
    I think I may have this table as well
    Last edited by chromguy; 04-15-2019 at 09:48 AM.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  11. #11
    Hybrid booster
    Join Date
    Oct 2015
    Location
    Jacksonville
    Posts
    411

    Re: Is EFI injector high or Low impedance?

    cc /mingrams /minPSIBARSlbs/hrcc /min80%95%FeedImped
    ance
    Application



    0-280-150-665 TBI60.0630.6453.643.53.060630.692.3109EV10LowChrysler 2.5l

  12. #12
    Hybrid booster
    Join Date
    Oct 2015
    Location
    Jacksonville
    Posts
    411

    Re: Is EFI injector high or Low impedance?

    630 cc

Similar Threads

  1. Turbonator SMEC using high-impedance injectors
    By jonnymopar in forum Electrical & Fuel System
    Replies: 1
    Last Post: 10-23-2014, 01:20 PM
  2. Fuel WTB: Big low low impedance injectors
    By tryingbe in forum Parts Wanted
    Replies: 1
    Last Post: 09-21-2012, 12:13 AM
  3. 86 GLHS High Speed/High Power Control Problem?
    By jonnyb in forum Suspension, Brakes, Wheels, Traction
    Replies: 32
    Last Post: 06-02-2010, 08:35 AM
  4. High impedance injectors on low impedance driver?
    By RoadWarrior222 in forum Electrical & Fuel System
    Replies: 5
    Last Post: 09-02-2008, 08:10 PM
  5. High impedance injectors
    By mock_glh in forum Electrical & Fuel System
    Replies: 13
    Last Post: 12-19-2007, 01:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •