Results 1 to 6 of 6

Thread: I need help on locating an electrical wiring tool

  1. #1
    Garrett booster
    Join Date
    Jan 2009
    Location
    Mothers Proving Grounds
    Posts
    236

    I need help on locating an electrical wiring tool

    I can't even think of the name of these Little Widgets rite now, And I've owned them and lost them! BUT. It's a little brass tube that can be inserted into electrical connectors to collapses the "prongs" that hold individual wires in the Male+Female connectors to allow us the customize wire harnesses. NAME OF TOOLS AND COMPANY WHERE I CAN PURCHASE THEM, PAHLEEZ, AND I THANK Y'ALL IN ADVANCE. Jer ... The Electric stores that were in all the Malls across the country has ceased to exist. I used to buy all this stuff like these brass widgets and solder wick in those stores ?????????

  2. #2
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    909

    Re: I need help on locating an electrical wiring tool

    Regards,
    Miles

    DD '87 Sundance T1, 12PSI, SLH with rear disks
    '87 CSX #432

  3. #3

    Re: I need help on locating an electrical wiring tool

    You beat me to it, If Didi-key doesn't have it no one does. I also use Del-City a lot...https://www.delcity.net/productsearc...&it=&x=14&y=12
    Another good supplier is https://www.jameco.com/webapp/wcs/st...atalogId=10001
    Worlds fastest 8 Valve 6.3sec., 119.70 1/8, Best MPH 145.5, Best 1/4 ET 9.78 sec.,144.26mph. 8 valve NO NITROUS!!

  4. #4
    Garrett booster
    Join Date
    Jan 2009
    Location
    Mothers Proving Grounds
    Posts
    236

    Re: I need help on locating an electrical wiring tool

    Chromguy you are the Man. Warren Streamer You're right there with him. Thank You both. The extractor tool is on it's way to me and I will now be able to swap both ends of a 6 gang Male and Female plug to install an Actuator on the rear axle of my Grand Caravan converted to Wheel Chair friendly.That little part drops the rear of the van 4"s when the door opens and the ramp drops out. (My actuator is bad and the only replacement part on the planet has a different non-compatible plug soooo) Thanks a bunch guys, Jer

  5. #5
    Garrett booster
    Join Date
    Dec 2010
    Location
    jerzy
    Posts
    200

    Re: I need help on locating an electrical wiring tool

    i have this 11pcs set from amazon... its fine.. $7
    https://www.amazon.com/Kalolary-Term...%3A11292772011

  6. #6
    Supporting Member II Turbo Mopar Contributor Dr. Johny Dodge's Avatar
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    1,089

    Re: I need help on locating an electrical wiring tool

    old x-acto knife blade and maybe some adjusting on the bench grinder has worked for me the past thirty five years ,.

    free and always available

Similar Threads

  1. General Need help locating a post
    By EZEILL in forum Parts Wanted
    Replies: 9
    Last Post: 04-03-2016, 01:53 AM
  2. 86 2.2t intermediate shaft, need help locating.
    By foreverunstopable in forum Transmission
    Replies: 10
    Last Post: 10-29-2015, 01:48 PM
  3. Electronics '82-'83 Rampage or Scamp wiring harness / electrical
    By williestargell in forum Parts Wanted
    Replies: 1
    Last Post: 03-29-2015, 06:17 PM
  4. Replies: 5
    Last Post: 02-03-2012, 04:12 PM
  5. Electrical guru's-help wiring up 2 fans into 1.
    By turbovanmanČ in forum Electrical & Fuel System
    Replies: 14
    Last Post: 03-23-2006, 10:06 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •