Not sure yet, 3 are made already and you have to account for .002 growth with hard coat.
Not sure yet, 3 are made already and you have to account for .002 growth with hard coat.
I can imagine it being something that might present more problems than it solves, that .002" could be just enough to be an issue...
Mike
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry
Bad laws are the worst sort of tyranny.
- Edmund Burke
It’s on the table when we do the batch when I get final count. But some thought is going to have to go into it.
I *HIGHLY* suggest the hard coating if you want any sort of longevity out of the drums. Even 7076 T6 won't stand up to sharp steels pounding against it and eventually the drums will get wear notches where the clutches ride.
Last edited by Warren Stramer; 09-23-2019 at 05:14 PM.
best 1/8 ET-6.16 sec. best 1/8 speed-119.70 Best 1/4 MPH 145.5, Best 1/4 ET 9.65 sec. 8 valve NO NITROUS!!
Normal anodizing I agree it does not grow. Hard coat is a minimum .002. I will look into the option, I've ran one of Brian's drum without issues. If it wears out, I will order another one it's part of racing.
Quick update, I should have all the pieces in the next week or so. Already test fitted into a brand new mopar unit at the machine shop, I'm going to disassemble my current unit and see if I get same amount of end play. The pump stator has to be machined down to accommodate the torrington bearings that replaced the fiber washers. Hard coat anodizing is an option, but will add to cost. The proto type wide bands are done, multi-spring pack for the large oversize 3rd gear piston, and the over-size pistons for 3rd. I'll get some pictures posted up somehow. As always working to move forward, will be working on straight cut planets and billet VB to give us more fluid flow for 3rd gear and better oil flow.
Posting pics for boots.
Sent from my ONEPLUS A6000 using Tapatalk
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
Logged in to post pics...yay already done.
I feel the DSM auto is dead myself. Jeff gave up.
I still want pinion and transfer gear group buy.
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Another pic from boots:
Sent from my ONEPLUS A6000 using Tapatalk
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
Transfer gear and pinion purchase needs more people!
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Boots, been a while since the last update.
Any news on how the testing is going/went?
Sent from my ONEPLUS A6000 using Tapatalk
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
I have not logged in forever, I have not tested the pieces yet. I was hoping to test them at IFO the 30th, but cylinder head is not ready.
I need these, i can send money whenever
so whats going on. have you had a chance to beat on it yet. looks expensive and time consuming to have made.