Hey guys. Got my assembled mpscilink.
Im trying to make an aggro. of my current challenges questions and steps i've taken.
1. Plugged it in at computer(win 10pro 64) via provided usb cable
2. Downloaded mpscandroid, setup bluetooth, save and sent lst files to mpscilink via scandroid bluetooth..... will the nextion display power up via usb or does it need 12v? needs 12v
3. Downloaded latest ardrino drivers.
so currently im trying to get mptune to communicate with the mpscilink. to update the unit
current issue MpTune is reading an ecu port on com1 and sees the mpsclink on com3 (under setup com port mpscilink is in the mpscilink section)
the bottom left corner stays as 'serial port settings com1' and the mpscilink tab is inactive....(none of the buttons work) what am i missing here? (i deleted com port 1 and it switched to com3 in the status window, did not communicate with mpsclink...)
hmm.. *I was missing libusb0.dll to flash the arduino. I went and downloaded the .zip version of the Arduino ide program and found the file and pasted it into /program files /mptune (not documents/mptune)
(dont have fb or hangouts...)
Reply With Quote
